Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -...
IEC 61300-2-22:2024 describes a procedure to determine the suitability of a fibre optic interconnecting device and a passive component to withstand the effects of a change of temperature or a succession of changes of temperature.
Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d...
L’IEC 61300-2-22:2024 décrit une procédure afin de déterminer l'aptitude d'un dispositif d'interconnexion et d'un composant passif fibronique à résister aux effets d’une variation de température ou d’une succession de variations de température.
IEC 62552:2024 provides a stable and reproducible procedure to calibrate the wavelength and power output of a tuneable laser against reference instrumentation such as optical power meters and optical wavelength meters (including optical frequency meters) that have been previously traceably calibrated.
L'IEC 62552:2024 fournit une procédure fiable et reproductible pour étalonner la longueur d’onde et la puissance de sortie d’un laser accordable en fonction des instruments de référence tels que des wattmètres optiques et des appareils de mesure de longueur d’onde optique (y compris des fréquencemètres optiques) dont la traçabilité a été préalablement étalonnée.
Quality management — Guidance for quality tools and their application
This document gives guidance on the selection and application of tools that can be used in a quality management system to:
a) characterize a process or a variable;
b) facilitate problem solving;
c) highlight areas for improvement;
d) improve effectiveness.
Steels for cold heading and cold extruding — Technical delivery conditions — Part 1: Non-alloy and a...
This document specifies requirements for non-alloy and alloy steels that are intended for cold heading or cold extruding and are delivered as wire rods, wire or bars. It also lists the specific requirements for:
— steels not intended for heat treatment, with diameters from 2 mm to 100 mm (see Annex A);
— case-hardening steels with diameters from 2 mm to 100 mm (see Annex B);
— steels…
Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steel...
This document specifies requirements for stainless steels that are intended for cold heading or cold extruding and are delivered as wire rods, wire or bars. It lists specific requirements for steels with diameters of 0,8 mm up to 50 mm for austenitic steels, up to 25 mm for ferritic steels and up to 100 mm for martensitic steels.
This document is applicable to the properties of cold-headed or…
Testing of paper and board — Compressive strength of a sample held in S-shape
This document specifies a test method for determining the compressive strength of a sample fixed into an S-shape in the machine direction.
This document is applicable to papers with a grammage of 80 g/m2 to 220 g/m2; different grammages can lead to unreliable results.
Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles
This document establishes principles for the use of colour characterization data as the definition of the intended relationship between input data and printed colour for file preparation, job assembly, proofing, and graphic arts production printing. It specifies the procedure used to adjust colour characterization data for the normally expected range of substrate colour.
Management de la qualité — Recommandations pour les outils qualité et leur mise en oeuvre
Le présent document donne des recommandations relatives à la sélection et la mise en œuvre d’outils qui peuvent être utilisés dans un système de management de la qualité pour:
a) caractériser un processus ou une variable;
b) faciliter la résolution de problèmes;
c) mettre en évidence les axes d’amélioration;
d) améliorer l’efficacité.
