Ships and marine technology — Transmitting heading devices (THDs) — Part 1: Gyro-compasses
This part of ISO 22090 specifies the construction, performance, and testing of gyro-compasses as transmitting heading device required by chapter V, SOLAS 1974 (as amended).
A Transmitting heading device (THD) is an electronic device that provides information about the ship’s true heading.
In addition to the general requirements contained in IMO Resolution A.694(17) to which IEC 60945 is…
Ships and marine technology — Transmitting heading devices (THDs) — Part 3: GNSS principles
This part of ISO 22090 specifies general requirements, construction, performance, and testing of transmitting heading device using GNSS principle as required by chapter V, SOLAS 1974 (as amended).
A transmitting heading device (THD) is an electric device that provides information about the ship's true heading.
In addition to the general requirements contained in IMO Resolution A.694(17) to…
Ships and marine technology — Transmitting heading devices (THDs) — Part 2: Geomagnetic principles
This part of ISO 22090 specifies the construction, performance, and testing of a device employing only magnetic means as transmitting heading devices required by chapter V, SOLAS 1974 (as amended).
A Transmitting Heading Device (THD) is an electronic device that provides information about the ship’s true heading.
In addition to the general requirements contained in IMO Resolution A.694(17) to…
Glass in building — Interlayer films for laminated glass and laminated safety glass
This document specifies the composition, tolerances and characteristics, i.e. mechanical, acoustic, optical and thermal properties, of folio interlayers for the manufacturing of laminated glass and laminated safety glass for use in buildings and construction works and it defines their general quality criteria.
NOTE In some countries, “film” is used instead of “folio”.
This document does not…
Ships and marine technology — Gyro-compasses for high-speed craft
This International Standard specifies the construction, performance, and type testing for gyro-compass for high-speed craft required by chapter X, SOLAS 1974 (as amended).
NOTE All requirements that are extracted from the recommendations of IMO Resolutions [Resolution A.821(19) on performance standards for gyro-compasses for high-speed craft and A.694(17)] are printed in italics.
The main…
Robotics — Industrial mobile robots — Communications and interoperability
This standard specifies communication protocols enabling interoperability among industrial autonomous mobile robot (AMR) systems produced by different vendors.
This standard covers AMRs, other aspects of AMR systems such as AMR fleet manager equipment, and other enterprise resources that would communicate with the AMRs in an industrial environment.
Exclusions:
• Safety-related requirements for…
Sterilization of health care products — Chemical indicators — Part 4: Type 2 indicator systems as an...
ISO 11140-4:2007 specifies the performance for a Class 2 indicator to be used as an alternative to the Bowie and Dick-type test for steam sterilizers for wrapped health care goods (instruments, etc. and porous loads).
An indicator complying with ISO 11140-4:2007 incorporates a specified material which is used as a test load. This test load may, or may not, be re-usable. ISO 11140-4:2007 does not…
Sterilization of health care products — Chemical indicators — Part 3: Type 2 indicators for use in t...
ISO 11140-3:2007 specifies the requirements for chemical indicators to be used in the steam penetration test for steam sterilizers for wrapped goods, e.g. instruments and porous materials. The indicator for this purpose is a Class 2 indicator as described in ISO 11140-1.
Indicators complying with ISO 11140-3:2007 are intended for use in combination with the standard test pack as described in EN…
