Non-destructive testing — Evaluation of vision acuity of NDT personnel
ISO 18490:2015 specifies the form of the optotype, the quality requirements for the chart, the test procedure, and the acceptance level for near vision acuity of NDT personnel. It also addresses the qualification requirements for personnel permitted to carry out the test.
ISO 18490:2015 only addresses near vision acuity under defined conditions similar to those encountered during routine NDT…
Air filters for general ventilation — Part 1: Technical specifications, requirements and classificat...
ISO 16890-1:2016 establishes an efficiency classification system of air filters for general ventilation based upon particulate matter (PM). It also provides an overview of the test procedures, and specifies general requirements for assessing and marking the filters, as well as for documenting the test results. It is intended for use in conjunction with ISO 16890‑2, ISO 16890‑3 and ISO 16890‑4.…
This document specifies terms and definitions of engineered stone intended for use in finished products such as countertops and vanities, floor and wall coverings and accessories including its raw materials, manufacturing, fabrication and installation.
Intelligent transport systems — Energy-based green ITS services for smart city mobility applications...
This standard specifies the data exchange requirements between related systems within smart city for electric vehicle-based demand response services utilizing nomadic devices as follows:
- Demand response for electric energy demand reduction during power system peak demand conditions and in response to fine dust warning issued according to air quality forecast
- Demand response for electric…
Guidelines for implementation of statistical process control (SPC) — Part 1: Statistical Process Man...
Statistical process control (SPC) concerns the use of statistical techniques and statistical or stochastic control algorithms to achieve one or more of the following objectives:
a) to increase knowledge about a process;
b) to steer a process to behave in the desired way;
c) to reduce variation of final-product parameters, or in other ways to improve performance of a process.
These…
Fasteners — Hexagon socket set screws with truncated cone point
ISO 4027:2003 specifies the characteristics of hexagon socket set screws with cone point and threads from M1,6 up to and including M24 and of product grade A.
This standard defines classification, general requirements, design requirements, and general characteristics of tools for submersibles, and also describes general test and detection methods for tools.
This standard is applicable to design, manufacture, inspection, and post-acceptance of submersible.
Robotics — Performance criteria and related test methods for service robots — Part 6: Lower-limb wea...
This International Standard specifies the test method to evaluate the assistance/enhancement performance of the lower-limb wearable robots by using an anthropomorphic test dummy robot (ATDR). ATDR wears the lower-limb wearable robot and runs test instead of a human thereby ensuring the objectivity and repeatability of the test. This International Standard is applied to all wearable robots that…
Optique et photonique — Lasers et équipements associés aux lasers — Vocabulaire et symboles
Le présent document définit les termes fondamentaux, les symboles et les unités de mesure à utiliser dans le domaine de la technologie laser de manière à unifier la terminologie et à établir des définitions claires et des essais reproductibles concernant les paramètres du faisceau et les propriétés des appareils à laser.
NOTE Le vocabulaire hiérarchique relatif au laser proposé dans le présent…
