Rechercher

Part 1 of ISO 17507 describes the calculation method for the methane number of a gaseous fuel according to the methodology first proposed Deutz (“Klöckner-Humboldt-Deutz AG”) and later amended by MWM (“Motoren-Werke Mannheim AG”).

Includes the external diameters and thicknesses of tubes, for all metallic materials, to be selected for all uses in aircraft structural and system design. They shall be selected from those specified in the table. The tolerances shall be specified in the relevant standard appropriate to the material and intended application.

The principle is based on placing a series of thermometric probes consisting of a rigid tube or flexible cable with one or more temperature-sensing devices throughout the mass of stored grain to detect or monitor changes in temperature. In larger stores, an automated temperature control may be used, the various measuring values being printed on paper. This second edition cancels and replaces the…

This Document specifies a method for the determination of total moisture content of solid recovered fuels (SRF) by drying a sample in an oven. This method is suitable for use for routine production control on site, e.g. if a high precision of the determination of moisture content is not required. It is applicable to all solid recovered materials including solid recovered fuels. NOTE 1 The total…

The method is applicable to carbon contents between 0,003% (m/m) and 4,5 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. The annexes give additional information on the international co-operative tests, a graphical representation of precision data and features of induction furnaces and carbon analysers.

This document specifies the testing method for hafnium in water at 360 and 18.5MPa. The testing method includes the apparatus, reagents, sampling, calibration,conditioning and procedures,etc. Application include ,but no exclusively, hafnium rod,plate,sheet and strip.

This document specifies test methods for the determination of the percentage of defective particles and of the microstructure of metallic blast-cleaning abrasives. This is one of a number of parts of ISO 11125 dealing with the sampling and testing of metallic abrasives for blast-cleaning. The types of metallic abrasive and requirements on each are contained in the various parts of ISO 11124. The…

ISO 19901-7:2013 specifies methodologies for - the design, analysis and evaluation of stationkeeping systems for floating structures used by the oil and gas industries to support production, storage, drilling, well intervention and production, production and storage, drilling, well intervention, production and storage, and - the assessment of stationkeeping systems for site-specific applications…