Rechercher

Le présent document spécifie les exigences concernant la préparation de surface, les matériaux, l'application, le contrôle et les essais des systèmes de revêtement ou de doublure destinés à être appliqués sur les surfaces internes des réservoirs en acier pour le stockage de pétrole brut, d'hydrocarbures et d'eau dans le but d'assurer leur protection contre la corrosion. Le…

This document specifies requirements for surface preparation, materials, application, inspection and testing of internal coating lining systems that are intended to be applied on internal surfaces of steel storage tanks of crude oil, hydrocarbons and water for corrosion protection. It covers both new construction and maintenance works of tank internal coating and lining as well as the repair of…

Le présent document établit les spécifications relatives à la famille C (engrenages) pour les lubrifiants, huiles industrielles et produits connexes de la classe L (voir ISO 6743-6). Le présent document concerne uniquement les lubrifiants pour systèmes d’engrenages sous carter. Les lubrifiants pour engrenages nus et les graisses pour engrenages (sous carter et nus) sont couverts par les autres…

This document provides general considerations to support the design guidance to geotechnical and civil engineers involved in the design of structures in which a geotextile is used to fulfil the function of an asphalt interlayer. The key potential failure mechanisms and design aspects to be considered are described, and guidance is proposed to select engineering properties. The state of the art is…

This document specifies the minimum requirements for rubber hoses and hose assemblies for use in oil burners. The following two types of hose assembly are specified: —     Type 1: Hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection; maximum working pressure 1,0 MPa (10 bar); maximum oil temperature 100 °C; —     Type 2: Hose…

This document specifies the dimensions of hexagonal head bolts, with MJ threads, metallic, coated or uncoated. It is applicable to test bolts for torque and tension tests.

Le présent document établit une méthode uniforme d'essai en laboratoire pour la détermination du débit d'air propulsé par un ventilateur à pression positive à travers une porte ouverte. NOTE            L'essai décrit dans le présent document n'est pas entièrement conforme à l'ISO 5801, bien qu’il fasse référence à plusieurs paragraphes de l'ISO 5801 (telles que le…

This document is part of the ISO 11890 series, dealing with the sampling and testing of coating materials and their raw materials. This document is applicable to the determination of volatile organic compound (VOC) content in the following cases: —     case 1: where there are single-pack coating materials other than case 3, and the expected VOC content is greater than a mass fraction of 5 %,…

This document establishes the specifications relative to family C (gears) for lubricants, industrial oils and related products of class L (see ISO 6743-6). This document deals only with lubricants for enclosed gear systems. Lubricants for open gears and greases for gears (enclosed or open) are covered by the other parts of the ISO 12925 series (i.e. ISO 12925-2 and ISO 12925-3). This document is…

This document establishes a uniform method of laboratory testing for the determination of airflow propelled through an open personnel door by a positive pressure ventilator. NOTE            The test described by this document is not entirely in accordance with ISO 5801, though it references several subclauses of ISO 5801 (such as the measurement of pressure and airflow). This document does not…