Rechercher

1 Scope 1.1 General This Standard pertains to the characterization of radioactive waste and irradiated fuel. This Standard a) specifies the overall requirements for establishing and implementing a waste characterization strategy, program, and plan; b) specifies methodologies for the sampling and characterization of radioactive waste and irradiated fuel; c) provides guidance for the timing…

Scope 1.1 InclusionsThis Standard specifies the requirements to address occupational health and safety (OHS) incident investigation and prevention program (IIPP). This Standard can be applied to inform investigations by organizations in any type of industry of any size. 1.2 ExemptionsThis Standard does not specify requirements for criminal or regulatory enforcement investigations. Notes: 1)…

1 Scope 1.1 Inclusions This Standard specifies the requirements to address occupational health and safety (OHS) incident investigation and prevention program (IIPP). This Standard can be applied to inform investigations by organizations in any type of industry of any size. 1.2 Exemptions This Standard does not specify requirements for criminal or regulatory enforcement investigations. Notes…

1 Domaine d’application 1.1 InclusionsCette norme spécifie les exigences relatives à la gestion de l’affaiblissement des capacités au travail, tout en fournissant des exigences et des directives spécifiques relatives à l’affaiblissement des capacités causé par la consommation de substances, observant les principes du système de gestion de la santé et de la sécurité au travail (SGSST), tels qu’…

1 Scope 1.1 This Standard applies to locking-type, pin and sleeve type plugs, receptacles, power inlets, connectors, junction boxes, and live-end covers rated up to 1200 A (for single- and multi-pole) and above 750 V to 35 kV ac, 50/60 Hz or up to 1500 V dc and which shall have one or more pilot contacts for multi-pole configuration and above 750 V to 1000 V ac or dc for single pole…

1 Scope 1.1 This Standard applies to open-type (fused and solid-blade) cutouts with a polymeric insulator structure component. These cutouts are intended for operation on alternating current distribution systems. 1.2 In some cases, specific types of construction are envisaged. This does not preclude the use of other types of construction, provided that the engineering representatives involved…

Le présent document spécifie la méthode d'essai de fatigue par flexion rotative de barreaux en matériaux métalliques. Les essais sont réalisés à température ambiante ou à température élevée dans l'air, l'éprouvette étant mise en rotation. Les essais de fatigue réalisés sur des éprouvettes entaillées ne sont pas couverts par le présent document, étant donné que leur forme et leur…

This document defines the Data Point Methodology for the creation of Data Point Models in the context of European supervisory reporting. Data Point Models are published by a European supervisory authority. To reflect the defined structures in a machine-readable form, they can be accompanied by an XBRL taxonomy. It is also possible to extend the described methodology to other environments.

This document provides guidelines for data point modelling for supervising experts. The main body consists of four sections. The interrogative form helps in choosing which section may best answer your question and lead you to a good understanding of the subject matter. After this first introductory section and the section containing terms and definitions, the main part starts to provide basic…

This document specifies requirements for CAN-based communication systems between the in-vehicle network and the diagnostic link connector of the vehicle. This document does not specify any requirements related to the in-vehicle CAN network architecture. This document specifies the requirements to enable the in-vehicle CAN-based communication systems to establish, maintain, and terminate…