Rechercher

This document specifies low complexity enhancement video coding.

1.1 Organization and content This National Standard of Canada sets out requirements for designing, manufacturing, marking, testing, selecting and using means of containment for the transportation of Category A and Category B infectious substances in Class 6, Division 6.2, solid medical waste of Category A and clinical, (bio) medical or regulated medical waste. This standard consists of three…

1.1 Organisation et contenu La presente Norme nationale du Canada enonce les exigences relatives a la conception et a la fabrication, au marquage, aux essais, a la selection et a !'utilisation de contenants pour le transport de matieres infectieuses de categorie A et de categorie B ( classe 6, division 6.2), de dechet medical solide de categorie A et de dechet d'hopital, (bio) medical…

1 Scope 1.1 General This Standard covers drinking water treatment systems that are a) point-of-use or point-of-entry plumbed-in systems; and b) point-of-use non-plumbed-in systems. Note: Drinking water treatment systems covered by this Standard are intended to be used for the reduction or inactivation of harmful substances that can be present in drinking water. 1.2 Electrical requirements…

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable mitre saws intended to be used with a toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 410 mm, which hereinafter might simply be referred to as saw or tool. This International…

1 Domaine d'application L'article de la Partie 1 s'applique, avec l’exception suivante: Addition: La présente partie de l’IEC 62841 s'applique aux scies à onglets transportables destinées à être utilisées avec une lame de scie dentée pour la coupe du bois et de matériaux analogues, de plastiques et de métaux non ferreux à l'exception du magnésium, la lame de scie…

1 Scope This document specifies requirements for classification of wire electrodes and weld deposits in the as-welded condition and in the post-weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. One wire electrode can be tested and classified with…

1 Domaine d'application Le présent document spécifie les exigences de classification des fils-électrodes et métaux d'apport déposés dans l'état brut de soudage et à l'état traité thermiquement après soudage, en soudage à l'arc sous protection gazeuse des aciers non alliés et à grains fins ayant une limite d'élasticité minimale pouvant atteindre 500 MPa ou une…

1 Scope 1.1 This Standard specifies requirements for evaluating adhesives used to bond solid wood materials in structural wood products designed for exterior applications. Note: See Annex C for additional information on exterior exposure and other moisture exposure categories for structural wood adhesives. 1.2 This Standard specifies requirements for evaluating the resistance of adhesives to…

1 Scope 1.1 This Standard specifies requirements for the selection, use, and application of active fall-protection equipment and systems as well as information on selection and use of post-fall rescue equipment, plans, and procedures. 1.2 The purpose of this Standard is to provide criteria and considerations for the safe selection and use of active fall-protection equipment and systems. 1.3…