Rechercher

IEC SRD 63219:2022 provides guidance for AAL service providers to design, procure, implement, and maintain AAL systems throughout their service life. The objective is to ensure that AAL systems are designed, configured, and installed to meet the needs of the AAL user and the requirements from applicable industry standards and global regulations. Ultimately, however, users of this document are…

This document specifies a test method for particle-free erosion corrosion of metallic materials by use of jet-in-slit which is flow induced corrosion in single phase flowing liquids. The test method can be used for ranking materials performance, selecting candidate materials and testing the effects of corrosion inhibitors.

This document specifies a laboratory method for determining the flash-ignition temperature and spontaneous-ignition temperature of plastics using a hot-air furnace. It is one of a number of methods in use for evaluating the reaction of plastics to the effects of ignition sources. NOTE       Information on additional ignition methods can be found in ISO 10093. This method does not give a direct…

This document describes a compressive vibration, non-resonance method for determining the components of the compressive complex modulus E* of polymers at frequencies typically in the range 0,01 Hz to 100 Hz. The method is applicable for measuring dynamic storage moduli of semi-rigid polymers in the range 1 MPa to 1 GPa. This method is particularly suited to the measurements of dynamic moduli and…

This document specifies the construction, performance requirements, methods of testing and required test results for the rate of turn indicators required by Clause 2.9.1, Regulation 19, chapter V, SOLAS 1974 (as amended, 2000). It is based upon the requirements of IMO Resolution A.526(13), and is also associated with IMO Resolution A.694 (17) and IEC 60945. Where a requirement in this document is…

This document, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of the following types of root crop harvesting machines trailed, mounted or self-propelled: —    sieving harvesters, —    root lifting harvesters, —    top lifting harvesters, which carry out more than one of the following operations: haulm/leaf…

Le présent document, destiné à être utilisé conjointement avec l’ISO 4254-1, spécifie les exigences de sécurité ainsi que leur vérification pour la conception et la construction des types suivants de machines de récolte racines et tubercules, qu’elles soient traînées, portées ou autotractées: —    arracheuses par tamisage; —    arracheuses par levage; —    arracheuses par préhension; qui…

This document specifies the principles governing the design and application of signs and plans used to create a natural disaster safety way guidance system to help people evacuate to safe areas or places of refuge in case of natural disasters (e.g. tsunamis, floods, debris flows, steep slope failures, landslides, tornados, large-scale fires, active volcanoes). This document provides guidance on…

The purpose of this document is to describe test plans and different operating methodologies of these test plans to define and verify the acceptable length of stability of a substance in a sample under specified conditions of preservation (temperature, matrix, light, addition of a stabilizer, where appropriate, type of preservation etc.) before starting analytical protocols (chemicals and physico…

This document specifies the construction, performance requirements, methods of testing and required test results for the propeller pitch indicators (hereinafter referred to as “indicator system”) required by Clause 2.5.4, Regulation 19, chapter V, SOLAS 1974 (as amended, 2000). This document is associated with IMO Resolution A.694 (17) and IEC 60945. Where a requirement in this document differs…