Oil and gas industries including lower carbon energy — Pipeline transportation systems — Onshore and...
This document provides requirements for the design, manufacturing, and layout of onshore and offshore pig traps allowing entry to a pipeline for the launching and receiving of pigs, inspection tools and other equipment to be run through a pipeline, together with the associated pipework, valves and instrumentation.
This document does not apply to installations for automatic launchers or to self-…
Road vehicles — Local Interconnect Network (LIN) — Part 6: Protocol conformance test specification
This document specifies the LIN protocol conformance test. This test verifies the conformance of LIN communication controllers with respect to ISO 17987-2 and ISO 17987-3.
This document provides all necessary technical information to ensure that test results are identical even on different test systems, provided that the particular test suite and the test system are compliant to the content of…
Hydraulic fluid power — Design methodology for energy efficient systems
This document specifies a design methodology for hydraulic systems that can be operated with the lowest possible energy consumption while maintaining the intended functionality of the stationary or mobile machinery in which they are installed.
This document takes into account the duty cycles of the application. The definition of the duty cycles is not part of this document.
Road vehicles — Local Interconnect Network (LIN) — Part 1: General information and use case definiti...
This document gives an overview of the structure and the partitioning of the ISO 17987 series. In addition, it outlines the use cases where the ISO 17987 series is used. The terminology defined in this document is common for all LIN communication systems and is used throughout the ISO 17987 series.
This document has been established to define the use cases for LIN.
This Standard specifies design and construction provisions for new accessible-ready houses and dwellings. Accessible-ready houses may not be accessible as defined in Clause 9.1. This Standard focuses on areas or elements that would reduce the effort and barriers associated with retrofitting a standard house or dwelling into an accessible one. These include:
? Exterior areas and clearances
?…
7 Portée
La présente norme précise les dispositions relatives à la conception et la construction de nouvelles maisons et logements accessibles. Les logements prêts à l’accessibilité peuvent être inaccessibles au sens de l’article 9.1. Cette norme met l’accent sur les zones ou les éléments qui réduiraient l’effort et les obstacles associés à la rénovation d’une maison ou d’un logement régulier en…
Multimedia systems and equipment for vehicles - Compact Driving Simulator (CDS) - Part 1: General
IEC TR 63583-1:2025, which is a technical report, specifies the system overview of the compact driving simulator (CDS), which is a virtual education and training system and a compact version of a driving simulator.
Electric vehicle battery swap system - Part 1: General and guidance
IEC 62840-1:2025 gives the general overview for battery swap systems, for the purposes of swapping batteries of electric road vehicles when the vehicle powertrain is turned off and when the battery swap system is connected to the supply network at standard supply voltages according to IEC 60038 with a rated voltage up to 1 000 V AC and up to 1 500 V DC.
This document is applicable for battery…
Système d’échange de batterie de véhicule électrique - Partie 1: Généralités et recommandations
IEC 62840-1:2025 donne une vue d’ensemble des systèmes d’échange de batterie qui sont destinés à échanger les batteries des véhicules routiers électriques lorsque le groupe motopropulseur du véhicule est désactivé et que le système d’échange de batterie est raccordé au réseau d’alimentation à des tensions d’alimentation normales conformes à l’IEC 60038, avec une tension assignée allant jusqu’à 1…
Ships and marine technology — Jacking system appliances on self-elevating unit — Acceptance tests
This document specifies the acceptance test requirements, test conditions, test contents and methods, test reports and other requirements for the jacking system of the self-elevating unit.
This document is applicable to the acceptance test of the rack and pinion jacking system and the hydraulic yoke and pin jacking system supporting the self-elevating unit. This document can also apply to the…
