Graphic technology — Requirements for communication of environmental aspects of printed products — P...
The ISO 22067 series specifies requirements and criteria for communication of environmental aspects within the print production supply chain. This document specifies requirements for environmental communication on print production, including all processes and print components used for the production of the final printed materials. This document is applicable for most printing methods but excludes…
This document gives means for ensuring that samples of natural gas and natural gas substitutes that are conveyed into transmission and distribution grids are representative of the mass to which they are allocated.
NOTE To ensure that a particular gas is taken into account in the standard, please see Annex A.
This document is applicable for sampling at sites and locations where…
Intelligent transport systems — Roadside modules SNMP data interface — Part 7: Support features
Field devices are a key component in intelligent transport systems (ITS). Field devices include traffic signals, message signs, weather stations, traffic sensors, roadside equipment for connected ITS (C-ITS) environments, etc.
Field devices often need to exchange information with other external entities (managers). Field devices can be quite complex, necessitating the standardization of many data…
Intelligent transport systems — Roadside modules SNMP data interface — Part 5: Logs
Field devices are a key component in intelligent transport systems (ITS). Field devices include traffic signals, message signs, weather stations, traffic sensors, roadside equipment for connected ITS (C-ITS) environments, etc.
Field devices often need to exchange information with other external entities (managers). Field devices can be quite complex, necessitating the standardization of many data…
Intelligent transport systems — Roadside modules SNMP data interface — Part 4: Notifications
Field devices are a key component in intelligent transport systems (ITS). Field devices include traffic signals, message signs, weather stations, traffic sensors, roadside equipment for connected ITS (C-ITS) environments, etc.
Field devices often need to exchange information with other external entities (managers). Field devices can be quite complex, necessitating the standardization of many data…
Fenestration energy performance/User Guide to CSA A440.2:22, Fenestration energy performance
1 Scope
1.1 General
This Standard applies to
a)
fenestration systems covered by AAMA/WDMA/CSA 101/I.S.2/A440, including
i)
vertically sliding windows;
ii)
horizontally sliding windows;
iii)
dual-action windows;
iv)
casement windows, both fixed and operable;
v)
projecting (awning/hopper) windows;
vi)
fixed windows;
vii)
sidelites;
viii)
transom windows;
ix)
sliding doors;
x…
Methods of testing petroleum and associated products - Low temperature flow test (LTFT) for diesel f...
1.1 This method describes a procedure for determining the filter plugging tendency of diesel fuels at low
temperature, usually due to the formation of wax crystals (see note in 6.1).
1.2 The method applies to all distillate diesel fuels. Fuels are expected to provide satisfactory fuel flow in
automotive equipment at temperatures equal to or higher than the minimum pass temperature as described…
CanadaMéthodes d’essai des produits pétroliers et produits connexes – Essai d’écoulement à basse tem...
1.1 La présente méthode permet de déterminer la tendance des combustibles diesels à colmater les filtres à
basse température généralement en raison de la formation de cristaux de cire (voir la note en 6.1).
1.2 La méthode s’applique à tous les combustibles diesels distillés. Il est prévu que les combustibles s’écouleront
librement dans le matériel automobile à des températures égales ou…
Non-destructive testing — Qualification and certification of NDT personnel (ISO 9712:2021, IDT)
This document specifies requirements for the qualification and certification of personnel who perform industrial non-destructive testing (NDT) in the following methods.
a) acoustic emission testing;
b) eddy current testing;
c) leak testing (hydraulic pressure tests excluded);
d) magnetic testing;
e) penetrant testing;
f) radiographic testing;
g) strain gauge testing;
h) thermographic…
1 Scope
1.1 This Standard covers plastic plumbing fixtures and specifies requirements for materials,
construction, performance, testing, and markings.
1.2 This Standard covers the following plumbing fixtures:
(a) bathtubs and combination tub/showers;
(b) lavatories;
(c) shower bases and shower stalls;
(d) sinks:
(i) bar sinks;
(ii) kitchen sinks;
(iii) laundry sinks;
(e) service sinks…