Rechercher

1. Scope 1.1 This Standard applies to reagent kits which employ a radioimmunoassay for the measurement of total triiodithyronine [T3 (RIA)] in human blood. 1.2 This Standard defines minimum requirements for the performance, labelling, testing and evaluation of such reagent kits. Note: Labellling requirements are intended to supplement the general provisions of Medical Devices…

1. Scope 1.1 General This Standard covers the load test procedure for evaluating the strength and deformation performance of wood roof trusses intended for use in housing and small buildings as defined in Part 9 of the National Building Code of Canada. Note: Part 9 of the National Building Code of Canada provides detailed requirements…

1. Scope 1.1 This Standard applies to stationary, electrically heated, warm air, central furnaces of the forced-air type that discharge air into ducts extending not less than 30 inches downstream from the heater elements, for use on nominal system voltages of 600 V and less, designed to be used in non-hazardous locations in household, commercial, and industrial applications, in accordance…

Prescribes specified values for the electrical and mechanical characteristics and for the principal dimensions of string insulator units of the long rod type with insulating parts of ceramic material intended for a.c. overhead lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. The smallest insulator unit standardized has a lighting impulse withstand voltage…

1. Scope 1.1 This Standard covers the features of three-phase submersible transformers. For other details, reference shall be made to CSA Standard C2, Single-Phase and Three-Phase Distribution Transformers Types ONAN and LNAN, which is hereinafter referred to as CSA Standard C2. Note: Included with this Standard is Appendix A, Recommendations for Corrosion Control of Submersible…

1. Scope 1.1 This Standard applies to portable, pressurized-type, liquid petroleum fuelled lamps and lanterns with one or more burners. Note: The term device as used in this Standard refers to both lamps and lanterns, as defined in Clause 2.1. The term lamp or lantern is used where specific reference is intended. 1.2 This Standard applies to devices intended for use outdoors or…

1. Scope 1.1 This standard provides recommended course guidelines for the minimum essential training of, and a procedure for the certification of three levels of personnel to perform liquid penetrant testing according to generally accepted and recognized procedures and techniques. 1.2 Such certification shall provide recognition of the qualifications and…

1. Scope 1.1 This Standard provides requirements for the designs, manufacture and quality control of concrete poles for such uses as transmission, traction and distribution line supports, telegraph and telephone line and telecommunication cable supports and flood and street lighting poles. 1.2 The requirements of this Standard may be applied to both spun and cast poles and to both…

1. Scope 1.1 This Standard applies to the construction and performance of automatically operated damper devices (herein referred to as devices) intended for installation in flue pipes serving automatically operated oil-fired appliances. Note: Also included are two Appendices concerned with the retrofitting of these devices to existing appliance installations. 1.2 This Standard…

1. Scope 1.1 This standard provides recommended course guidelines for the minimum essential training of, and a procedure for the certification of three levels of personnel to perform magnetic particle testing according to generally accepted and recognized procedures and techniques. 1.2 Such certification shall provide recognition of the qualifications and…