Rechercher

This International Standard specifies the recorded characteristic for magnetic Sound records on 35 mm motion-picture film excluding striped release prints when used at the nominal Speed of 24 frames (45,6 cm or 18 in) per second or 25 frames (47,5 cm or 18.7 in) per second. NOTE - This International Standard and relevant portions of Recommendation No. 265-2 of the CCIR have substantially the same…

1. Scope 1.1 General 1.1.1 This Standard applies to the continuous measurement of the concentrations of (a) oxygen (O2) (see Clause 6.1); (b) carbon dioxide (CO2) (see Clause 6.2); (c) carbon monoxide (CO), (see Clause 6.3); (d) sulphur dioxide (SO2) (see Clause 6.4); and (e) nitrogen oxides (NOx); in a continuously extracted sample of combustion gases from an enclosed gas…

1. Scope 1.1 General This Standard applies to (a) reagents and apparatus for preparing dialysing fluid; (b) monitors of the dialysing fluid; (c) accessories for monitoring the extracorporeal blood circuit; and (d) blood pumps, infusion, and single needle systems. Notes: (1) Examples of reagents and devices included within the Scope of this Standard are dialysis concentrate and…

1. Scope 1.1 This Standard applies to stationary electric duct heaters for comfort heating rated at 600 V or less and 1000 kW and less, designed to be installed and used in nonhazardous locations in residential, commercial, and industrial applications, in ac cordance with the Canadian Electrical Code, Part I. Note: The Canadian Electrical Code, Part I, provides a limitation of 150 V to…

1. Scope and Purpose 1.1 This Standard applies to the design, installation, operation, and maintenance of those portions of a hospital electrical system in which the interruption of the normal supply would jeopardize the effective and safe care of its patients, the safety of hospital staff, and the public. 1.2 This Standard includes requirements for the installation of a hospital…

The present standard describes the method to determine the relation between the moisture content and the density of soils and soil aggregates when these are compacted in standard moulds using 4,54 kg rammers dropped a height of 457 mm. Four methods are described herein. NOTE 1 - The laboratory compaction tests described in this standard generally provide good measures of optimum moisture…

1. Scope 1.1 This Standard specifies the mechanical, dimensional and electrical requirements for ceramic and glass type station post insulators for indoor or outdoor service in electrical installations or equipment operating with a rated voltage greater than 1000 V and a rated frequency not greater than 100 Hz. 1.2 This Standard covers insulators intended primarily for use as support…

1. Scope 1.1 This Standard defines the consideration and requirements for performing an acceptable seismic qualification test and presents the different test methods that may be used. Note: Selected safety related systems are required to be seismically qualified. (See CSA Standard CAN3-N289.1.) Qualification may be by analysis or testing, or a combination thereof, depending on the nature…

1. Scope 1.1 This Standard applies to the measurement of vinyl chloride in air, using grab samples or integrated samples, usually collected by continuous adsorption in a sorbent tube over a period of time. 1.2 This Standard employs gas chromatography for the measurement of concentrations of vinyl chloride in air between 0.01 mg·m-3 and 2600 mg·m-3 at 25°C and 101.3 kPa. 1.3 Grab…

Preface This is the second edition of CSA Special Publication O414, Manual of Terms and Definitions Recommended for Use in CSA Wood Standards. It revises and supersedes the previous edition published as CSA MISC.003-1968. The Manual has been prepared primarily as a reference document for CSA committees responsible for forest products or other wood related standards and is intended to…