Rechercher

1. Scope 1.1 This Standard applies to air-heaters intended for use on nominal system voltages of 600 V or less, designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard applies to permanently connected and cord connected a ir-heaters for household, commercial, and industrial use in nonhazardous locations. 1.3 The term air-heater…

This International Standard specifies the cutting and perforating dimensions for 16 mm motion-picture film which is perforated 8 mm Type R, as well as the width of the motion-picture film after processing and slitting. NOTE - Film perforated in accordance with this International Standard is also referred to as "double 8 mm motion-picture film".

1. Scope 1.1 This Standard applies to low-pressure connecting assemblies for medical gas systems in any health care facility. 1.2 This Standard contains two parts as follows: (a) Part I contains requirements relating to the construction, performance, and identification of low-pressure connecting assemblies (see Clauses 3 through 6); and (b) Part II contains requirements relating…

1. Scope 1.1 This Standard addresses monitors intended for the detection of interruptions of the patient's breathing gas during controlled ventilation in anaesthesia by monitoring pressure in the breathing circuit. It does not address monitors based on gas composition, flow, or exhaled volume. Notes: (1) Applications for critical care ventilation are not considered but may be…

The Standard specifies the following characteristics of the oil. Appearance: Clear, mobile liquid. Colour: Pale yellow. Odour: Characteristic rose like, with grassy note. Relative density at 20/20 °C: 0,880 - 0,894. Refractive index at 20 °C: 1,4710 - 1,4780. Optical rotation at 20 °C: Range from - 1,4 to + 3 . Miscibility with 70 % (V/V) ethanol at 20 °C: 1 : 2. Acid value: Maximum 1,0. Further…

1. Scope 1.1 This Standard applies to devices designed for installation on road motor vehicles to provide a daytime running light function where the vehicle is not factory-equipped with a daytime running light system. Note: This Standard has been harmonized as far as practicable with the applicable Canadian Motor Vehicle Safety Regulations. 1.2 This Standard covers the minimum…

1. Scope 1.1 This Standard provides sample preparation, measurement, and test procedures for the determination of compliance of Construction Sheathing panels with the requirements of CSA Standard CAN/CSA-O325.0 and for assessing other characteristics of pan els. 1.2 The units, test method, size of specimens, number of specimens per panel, and the conditioning requirements are…

Defines local area networks and their characteristics. Gives an overall view of the characteristics to be taken into consideration in all standardization work on local area networks. This publication has the status of a technical report. Note: -For the price of this publication, please consult the ISO/IEC price-code list.

1.1 Scope 1.1.1 This Standard applies to manual lever operated, pressure lubricated, straight way gas shut-off valves of metallic construction with weld and flanged and threaded ends. 1.1.2 This Standard applies to valves used in: (a) appliances and equipment where gas is to be used for fuel purposes and, (b) piping and tubing systems falling within the pressure limitations…

This National Standard of Canada is equivalent to International Standard ISo 9075:1987. 1. Scope and field of application This standard specifies the syntax and semantics of tow databases languages: 1) A schema definition language (SQL-DDL), for declaring the structures and integrity constraints of an SQL database. 2) A module language and a data manipulation language (SQL-DML),…