Rechercher

1.1 General This Standard provides recommended practices for emergency sterilization in hospitals and similar health care facilities. These recommendations are intended to increase assurance of sterility and to assist health care personnel in the proper use of processing equipment. Notes: (1) "Similar health care facilities" includes nursing homes, extended-care facilities,…

1. Scope 1.1 These requirements cover the construction and operation of 9 Litre stored pressure water type fire extinguishers. 1.2 Stored pressure water type fire extinguishers shall also comply with the requirements of the Standard for the Rating and Fire Testing of Fire Extinguishers, and Class D Extinguishing Media, CAN/ULC-S508. 1.3 A stored pressure water type fire…

This National Standard of Canada is equivalent to International Standard ISO 9004-1987. It describes a basic set of elements by which quality management systems can be developed and implemented. The selection of appropriate elements contained in this International Standard and the extent to which these elements are adopted and applied by a company depends upon factors such as market…

1.1 General This Standard specifies minimum requirements for stile and rail wood doors. The Standard provides definitions, tolerances, sizes, construction, types of doors, detailed requirements, grading, and testing methods. Note: This extract from CSA Standard O132.2-M1977 does not include requirements for flush doors (solid or hollow core) or moulded skin doors. 1.2 Classification…

This National Standard of Canada is equivalent to International Standard ISo 9004-2:1991. This Part of ISO 9004 gives guidance for establishing and implementing a quality system within an organization. It is based on the generic principles of internal quality management described in ISO 9004:1987 and provides a comprehensive overview of a quality system specifically for services. This…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI T1.408-1990. 1.1 General It establishes performance and technical criteria for interfacing and interconnecting the various functional groups shown in figure 1. Compliance with this standard is intended to ensure compatibility at the interface points /a and /b (figure 1) and should not…

1.1 Covers the design, fabrication, installation, inspection, testing, and safety aspects of the operation and maintenance of gas pipeline systems including gathering lines, transmission lines, compressor stations, metering and regulating stations, distribution lines, and service lines. 1 .2 The Scope of this Standard, as shown in Figure 1.1, includes the following: (a) gas storage…

This National Standard of Canada is based on International Standard ISO 302:1981. 1.1 The Kappa number test is used for evaluation of pulps with regard to the degree of delignification and bleachability. 1.2 The method can be applied to pulps produced in yields up to about 65% and giving Kappa numbers not higher than 100 on hardwood pulps, and not higher than 120 on softwood pulps (Note 1).…

1. Scope 1.1 These requirements apply to drive machine controllers, logic controllers, and operating devices accessory thereto, for starting, stopping, regulating, controlling, or protecting electric motors, generators, or other equipment, for elevators, escalators, moving walks, dumbwaiters, and elevating devices for the handicapped (wheelchair and stairway lifts). 1.2 The electrical…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI T1.612-1990. 1 Scope This standard covers the connection between the Integrated Services Digital Network (ISDN) and terminals with interfaces for modems conforming to current standards (e.g. ANSI/EIA 232-D-1986), operating in accordance with demand or semi-permanent circuit mode ISDN…