Rechercher

1.1 This Standard sets forth requirements and guidance pertaining to the various sea operations that are involved with fixed offshore structures. As sea operations are complex activities unique to each application, these requirements should be reviewed for each application to ensure that the particular circumstances are adequately addressed. Notes: (1) This Standard addresses four…

1.1 This Standard sets out requirements for the proper selection, use, and care of respiratory protective devices and for the administration of an effective respiratory protection program. 1.2 This Standard does not apply to (a) underwater breathing devices; (b) aircraft oxygen systems; (c) military masks; or (d) inhalators and resuscitators. 1.3 In this Standard the word "shall…

1.1 General This Standard covers seamless, continuous welded, electric welded (flash welded pipe and low frequency electric welded pipe excluded), and submerged arc welded pipe primarily intended for use in oil or gas pipeline systems. Notes: (1) Flash welded pipe is pipe manufactured by a process combining electric resistance heating to produce a simultaneous coalescence over the entire…

1. Scope 1.1 This Standard applies to fixed and operable windows, covered by CSA Standard CAN/CSA-A440, and to sliding glass doors, covered by CGSB Standard CAN/CGSB-82.1, that are factory-assembled and intended for vertical installation in building. Note: The term "window" is often used within this Standard to include both windows and sliding glass doors. 1.2 This Standard…

1. Scope 1.1 These requirements apply to life safety ropes and associated equipment used by the fire service for the purpose of raising, lowering or horizontally moving a maximum of two people. Part A covers the requirements for life safety ropes; Part B covers the requirements for body support devices; Part C covers the requirements for hardware. Note: 1) Life safety ropes are to be…

1. Scope This clause of CSA Standard C22.2 No. 1335.1 is applicable except as follows: 1.1 Addition This standard applies to (a) egg boilers; (b) milk heaters; (c) feeding-bottle heaters; (d) pressure cookers having a nominal cooking pressure not exceeding 140 kPa (1.4 bar) and a rated capacity not exceeding 10 litres; (e) slow cookers; (f) yoghurt-makers; (g) baby-food warmers/…

1.1 This standard deals with the safety of electrical appliances for household and similar purposes, the rated voltage of the appliance being not more than 250 V, and for use in nonhazardous locations, in accordance with the rules of the Canadian Electrical Code, Part I and the National Electrical Code. 1.2 Appliances may incorporate motors, heating elements or their combination, and…

1.1 This standard applies to electric kitchen appliances and to accessories intended to be used with multi-purpose kitchen appliances. Examples of kitchen appliances are: (a) mixers; (b) cream whippers; (c) egg beaters; (d) blenders for liquids; (e) blenders for food; (f) sieving appliances; (g) churns; (h) ice-cream appliances, including bucket type and those for use in…

1.1 The principles and general practices set out in this document apply to all aspects of the environmental auditing activity. 1.2 With the wide interest in environmental auditing and the range of interested parties, a number of different types of environmental audits are required to satisfy the range of objectives and interests that exist. Note: There are a number of different types…

La présente Norme internationale prescrit les dimensions générales des tarauds courts à machine et à main. Ces dimensions, établies en fonction du diamètre et du pas de filetage, sont les suivantes: -- longueur filetée (maximale); -- longueur totale; -- diamètre de queue et dimensions du carré d'entraînement; -- dimensions de raccordement entre la queue et la partie taillée. La présente…