Rechercher

1 Scope 1.1 This Standard applies to extra-low-voltage landscape lighting systems and associated components that are intended for cord-connected, direct plug-in, or permanent connection to a branch circuit of not more than 150 volts-to-ground in accordance with the Canadian Electrical Code, Part I. 1.2 This Standard only covers extra-low-voltage landscape lighting systems where the maximum…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of all kinds of electrical heating appliances used for livestock rearing and breeding, such as: heat-radiating appliances, electrical sittinghens, incubators, chicken breeding units and heating plates for animals, the rated voltage of the appliances being not more than 250 V for single-…

1 Scope 1.1 Inclusions This Standard applies to the following electrically driven, mechanical, vapour compression-type systems: a) factory-made commercial and industrial unitary air-cooled air conditioners and heat pumps rated above 19 kW (65 000 Btu/h) cooling capacity at standard rating conditions for both single- and three-phase electrical power supplies; b) factory-made commercial and…

1 Scope 1.1 Fire-performance and antistatic requirements This Standard specifies fire-performance and antistatic requirements for new (unused) conveyor belting for use in any part of a mining or excavation operation that is below the surface. 1.2 Types of fire-performance and antistatic conveyor belting This Standard covers fire-performance and antistatic conveyor belting of the following…

1 Scope 1.1 Inclusions This Standard applies to newly-produced, hand-operated quick-disconnect devices, sizes NPS 1/8 in to 1-1/2 in, hereinafter also referred to as devices, constructed entirely of new, unused parts and materials which provide a means for connecting and disconnecting appliances or appliance connectors to gas supplies, and which are for indoor and outdoor applications. These…

Scope This National Standard of Canada describes two grades of propane used for fuel purposes. These grades consist mainly of hydrocarbons containing three carbon atoms. Grade 1 is intended for use in internal combustion engines and for general industrial and commercial fuel applications. Grade 1 maintains a minimum octane quality by limiting concentrations of low-octane components (see 6.5…

Objet La présente Norme nationale du Canada s’applique à deux grades de propane utilisé comme carburant. Ces grades sont principalement constitués d’hydrocarbures comptant trois atomes de carbone. Le propane de grade 1 est destiné aux moteurs à combustion interne et peut servir de carburant dans des applications industrielles et commerciales de nature générale. Il conserve un indice d’octane…

IEC 60317-89:2023 specifies the requirements of enamelled round aluminium winding wire of class 200 with a sole coating based on polyesterimide resin, which can be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance…

IEC 60317-93: 2023 specifies the requirements of enamelled rectangular copper winding wire of class 220 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide-imide resin. NOTE A modified…

This document gives guidance on internal investigations within organizations, including: —     the principles; —     support for investigations; —     establishment of the policy, procedures, processes and standards for carrying out and reporting on an investigation; —     the reporting of investigation results; —     the application of remedial measures. This document is applicable to all…