Information technology - Volume and file structure of write-once and rewritable media using non-sequ...
ISO/IEC 13346 specifies a format and associated system requirements for volume and boot block recognition,
volume structure, file structure and record structure for the interchange of information on media between users of
information processing systems.
The media shall be recorded as if the recording of sectors may be done in any order.
Note 1 - The medium is not restricted to being of only one…
Air cargo — Insulated container — Thermal efficiency requirements
This International Standard specifies the minimum operational requirements for thermal efficiency to ensure that
perishable cargoes in insulated standard airborne containers are kept in prime condition during the ground handling
and air transportation cycle for a maximum period of 36 h.
It is applicable to all insulated air cargo containers irrespective of their size and designation. It does not…
Information technology — Volume and file structure of write-once and rewritable media using non-sequ...
ISO/IEC 13346 specifies a format and associated system requirements for volume and boot block recognition,
volume structure, file structure and record structure for the interchange of information on media between users of
information processing systems.
The media shall be recorded as if the recording of sectors may be done in any order.
Note 1 - The medium is not restricted to being of only one…
Lung ventilators for medical use - Part 2: Particular requirements for home
care ventilators
1.1 Scope
NOTE - See the rationale in annex M.
This part of ISO 10651 is one of a series of International Standards based on
IEC 601-1:1988 (the "General Standard"): this type of International Standard is
referred to as a "Particular Standard". As stated in 1.3 of IEC 601-1:1988,
the requirements of this part of ISO 10651 take precedence over those of IEc
601-1:1988…
1. Scope
1.1
This Standard applies to acrylonitrile-butadiene-styrene drain, waste, and vent (ABS-DWV) pipe, pipe fittings, and accessories such as factory-assembled expansion joints, closet flanges, and backwater valves.
1.2
This Standard includes requirements for materials, quality of work, dimensions and tolerances, impact strength, chemical resistance, water resistance, dimensional…
1. Scope
1.1
This Standard applies to poly (vinyl chloride) drain, waste, and vent (PVC-DWV) and chlorinated poly (vinyl chloride) drain, waste, and vent (PVC-DWV) pipe, pipe fittings, and accessories such as factory-assembled expansion joints, closet flanges, and backwater valves.
1.2
This Standard includes requirements for materials, quality of work, dimensions and tolerances, impact…
1. Scope
1.1
This Standard provides requirements for polyolefin laboratory drainage systems from corrosive applications. Requirements for materials, pipe, and fittings
are included.
Note: Polyolefin includes both polyethylene and polypropylene plastics.
1.2
These requirements apply to pipe and fittings that are to be joined by heat fusion using the joining equipment supplied by the…
1. Scope
1.1
This Standard applies to coextruded thermoplastic drain, waste, and vent pipe with an outer layer of acrylonitrile-butadiene-styrene (ABS) and an inner layer of polyvinyl chloride (PVC) or with a outer and inner layers of
acrylonitrile-butadiene-styrene (ABS) and a core of polyvinyl chloride (PVC), to be used with fittings, accessories, and solvent cement meeting the…
1. Scope
1.1
This Standard provides requirements for the following:
(a) plastic drain and sewer pipe and plastic pipe fittings with pipe stiffness of 275, 320, or 625 kPa, including both single-wall and coextruded dual-wall pipe with a smooth interior;
(b) single-wall, noncorrugated, perforated plastic pipe and plastic pipe fittings;
(c) coextruded dual-wall perforated plastic pipe with…
1. Scope
1.1
This Standard describes requirements and test methods for materials, dimensions, quality of work, pipe stiffness, quality control, joining systems, and marking for SDR 28, 35, and 41 Type PSM PVC sewer pipe and fittings.
Note: Industrial waste disposal lines should be installed only with specific approval of the regulatory authority, since chemicals not commonly found in…
