Rechercher

Scope 1.1 This Standard applies to cords and cord sets intended for indoor use to electrically connect communication systems that have a normal operating voltage-to-ground of less than 150 V rms, and that are installed or used in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard applies to single-, paired-, and multi-conductor cords, as well as cord sets,…

Scope 1.1 This Standard defines requirements for the periodic inspection of pressure-retaining systems, components, and supports that form part of a CANDU nuclear power plant. 1.2 This Standard addresses (a) failure aspects; (b) classification of areas subject to inspection; (c) provision for access; (d) inspection techniques and procedures; (e) personnel qualifications; (f) frequency of…

Scope 1.1 This Standard specifies energy performance requirements for self-contained drinking water coolers having an hourly rated capacity of up to 21 mL/s (20 US gal/h). Included are: (a) procedures for measuring capacity and energy consumption, including standby losses; and (b) maximum energy consumption levels. 1.2 This Standard applies to the following mechanical, thermoelectric, and other…

IEC 60331-1:2009 specifies the test apparatus and procedure and gives the performance requirements, including recommended flame application times, for low voltage power cables of rated voltage up to and including 0,6/1,0 kV and control cables with a rated voltage which are required to maintain circuit integrity when subject to fire and mechanical shock under specified conditions. It is intended…

IEC 60331-2:2009 specifies the test apparatus and procedure and gives the performance requirements, including recommended flame application times, for low-voltage power cables of rated voltage up to and including 0,6/1,0 kV and control cables with a rated voltage which are required to maintain circuit integrity when subject to fire and mechanical shock under specified conditions. It is intended…

IEC 60331-3:2009 specifies the test apparatus and procedure and gives the performance requirements, including recommended flame application times, for low-voltage power cables of rated voltage up to and including 0,6/1,0 kV, and control cables with a rated voltage which are required to maintain circuit integrity when tested in a metal enclosure and when subject to fire and mechanical shock under…

ISO 8459:2009 includes data elements that are exchanged or are potentially exchanged among bibliographic systems. Those data elements that are not exchanged or not likely to be exchanged are ignored as they do not need standardization. Data elements being handled by transport protocols are not included, only those related to application level protocols. NOTE The French version of this…

Preface This is the second edition of CSA Z96, High-visibility safety apparel. It supersedes the previous edition published in 2002, and is based on the identically titled American National Standards Institute Standard ANSI/ISEA 107. It is also designed to be in harmony with CEN EN 471. Scope 1.1 This Standard specifies requirements for occupational apparel that is (a) capable of signalling…

SCOPE This standard applies to onsite residential wastewater treatment technologies used to treat wastewater from isolated dwellings. It is neither the intention of this standard to establish the performances requirements of onsite wastewater treatment technologies designed for water reuse nor those used for other buildings that may be considered as similar to isolated dwellings, such as…

1 Scope 1.1 This Standard provides criteria for the structural design and appraisal of structures or structural elements made from wood or wood products, including graded lumber, glued-laminated timber, unsanded plywood, oriented strandboard (OSB), composite building components, shearwalls and diaphragms, timber piling, pole-type construction, prefabricated wood I-joists, structural composite…