Rechercher

Preface This is the ninth edition of CSA C22.3 No. 1, Overhead systems, one of a series of Standards issued under the Canadian Electrical Code, Part III. It supersedes the previous editions, published in 2006, 2001, 1987, 1985, 1979, 1976, and 1970, and the original edition, which was published as a series of five Standards in 1959, 1953, 1947, and 1940. Scope 1.1 This Standard applies to…

Preface This is the second edition of CSA C827, Energy performance of food service refrigerators and freezers. It supersedes the first edition, published in 1998. Scope 1.1 This Standard applies to commercial refrigerator, refrigerator-freezer, and freezer cabinets that are intended for storing or holding food products and other perishable merchandise. 1.2 This Standard specifies…

Scope 1.1 Purpose The purpose of this Standard is to establish criteria for the design, manufacture, testing, inspection, installation, maintenance, use, and operation of vehicle-mounted aerial devices installed on a chassis, primarily used to position personnel, and for the training of operators for that equipment, to achieve the following objectives: (a) prevention of personal injuries and…

1 PURPOSE This standard specifies the requirements regarding good work-family balance (WFB) practices tailored to the characteristics and realities of organizations and their employees. This standard aims at promoting WFB as an integral part of an organization’s management of human resources. 2 SCOPE This standard applies to all types of organizations (private, public and other) seeking…

1 PURPOSE The purpose of this standard is to establish the requirements for responsible event management practice, to which event organizers shall conform to demonstrate their capacity to produce events in compliance with their commitments and/or customer requirements, while taking into account the principles of sustainable development. 2 SCOPE This standard is intended for event organizers.…

Scope 1.1 This Standard applies to electrically operated, general-purpose valves* and safety valves* that are intended to be used in ordinary locations in accordance with the Canadian Electrical Code, Part I, for the control of fluids (e.g., air, gases, oils, refrigerants, steam, water, etc.), and rated 600 V and less. *For convenience, the shorter term "valve" is used where the same…

IEC 60335-1:2010 deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Battery-operated appliances and other d.c. supplied appliances are within the scope of this standard. Appliances not intended for normal household use but which nevertheless may be a source of…

ISO/IEC 29133:2010 specifies methodologies to be used for the conformance of rewritable hybrid media data carriers, which combine radio frequency identification (RFID) tag technology with linear and/or two-dimensional bar code symbologies that are written to an erasable substrate. Three main product configuration types are addressed within ISO/IEC 29133:2010: Rewritable Media, which supports the…

ISO/IEC 29133:2010 specifies methodologies to be used for the conformance of rewritable hybrid media data carriers, which combine radio frequency identification (RFID) tag technology with linear and/or two-dimensional bar code symbologies that are written to an erasable substrate. Three main product configuration types are addressed within ISO/IEC 29133:2010: Rewritable Media, which supports the…

Preface This is the first edition of the CSA Z245.20 Series, Plant-applied external coatings for steel pipe, which consists of the sixth edition of CSA Z245.20, Plant-applied external fusion bond epoxy coating for steel pipe, the fifth edition of CSA Z245.21, Plant-applied external polyethylene coating for steel pipe, and the first edition of CSA Z245.22, Plant-applied external polyurethane foam…