Rechercher

Preface: This is the second edition of CAN/CSA-C22.2 No. 60601-2-50, Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard 60601-2-50 (second edition, 2009-03). It supersedes the…

Preface This is the second edition of CAN/CSA-Z5359, Low-pressure hose assemblies for use with medical gases, which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Standardization) Standard 5359 (third edition, 2008-06-15). It supersedes the previous edition, published in 2004 as CAN/CSA-Z5359 (adopted ISO 5359:2000). Scope 1.1 * This…

Preface This is the first edition of CAN/CSA-Z24510, Activities relating to drinking water and wastewater services - Guidelines for the assessment and for the improvement of the service to users, which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Standardization) Standard 24510 (first edition, 2007-12-01). Scope This…

Preface This is the first edition of CAN/CSA-Z24511, Activities relating to drinking water and wastewater services - Guidelines for the management of wastewater utilities and for the assessment of wastewater services, which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Standardization) Standard 24511 (first edition, 2007-12-01).…

Preface This is the first edition of CAN/CSA-Z24512, Activities relating to drinking water and wastewater services - Guidelines for the management of drinking water utilities and for the assessment of drinking water services, which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Standardization) Standard 24512 (first edition, 2007-12-01…

Scope 1.1 This Code applies to the installation of (a) appliances, equipment, components, and accessories where gas is to be used for fuel purposes; (b) piping and tubing systems extending from the termination of the utility installation or from the distributor's propane tank; (c) vehicle-refuelling appliances and associated equipment meeting the requirements of a general-purpose appliance…

Scope 1.1 This Code applies to (a) the storage, handling, and transfer of propane; (b) the installation of appliances, equipment, components, accessories, and containers on highway vehicles, recreational vehicles, mobile housing, outdoor food service units, and wash-mobiles when propane is to be used for fuel purposes; (c) propane used as an engine fuel in other than highway vehicles; and (d)…

Scope 1.1 This Code contains the requirements for fuel-related components and accessories and their assembly on an appliance utilizing gas, downstream of the manual shut-off valve specified in Clause 6.18.2 of CSA B149.1. Clause 13 of this Code contains additional requirements for process ovens, including bakery ovens, process furnaces, and atmosphere generators operating at approximately…

Scope 1.1 This Code applies to the installation, servicing, and repair of propane fuel system components and tanks on highway vehicles for the provision of motive power. This does not apply to vehicles qualified under the Canadian Motor Vehicle Safety Regulations. 1.2 Where the term "propane" is used, the requirements of this Code include, and apply equally to, any material that is…

IEC 31010:2009 is a dual logo IEC/ISO, single prefix IEC, supporting standard for ISO 31000 and provides guidance on selection and application of systematic techniques for risk assessment. This standard is not intended for certification, regulatory or contractual use. NOTE: This standard does not deal specifically with safety. It is a generic risk management standard and any references to safety…