Rechercher

1.1 This Standard specifies dimensional and safety requirements for recreational vehicles. Its purpose is to specify minimum criteria for providing a degree of protection against loss of life from fire and explosion. 1.2 The CSA Z240 RV Series of Standards does not apply to park model trailers. Note: Park model trailers are covered by the CAN/CSA-Z241 Series of Standards. 1.3 The values…

1.1 Cette norme prescrit des critères et méthodes à employer pour établir et vérifier les rendements énergétiques nominaux des appareils et équipements à combustible. Cette norme comprend des marches à suivre pour l’échantillonnage et pour l’analyse et la communication des résultats d’essais. 1.2 Cette norme vise, de façon non limitative, les appareils de combustion énumérés au tableau 1 et…

Scope 1.1 General This Standard covers requirements for the manufacturing, inspection, testing, marking, requalification, reheat treatment, repair, and rebuilding of cylinders, spheres, and tubes (containers) for the transportation of dangerous goods. In addition, it includes the requirements for the qualification of new designs and registration requirements. 1.2 Designations and…

1 Scope 1.1 This Standard applies to decorative lighting strings, decorative lighting outfits, pre-lit trees, and accessories, intended for seasonal or commercial use connected to circuits of 120 V nominal or less by means of an attachment plug, and designed to be used in accordance with the rules of the Canadian Electrical Code, Part I, in non-hazardous locations. 1.2 These requirements…

International Standard IEC 60335-2-78:2002+A1:2008 (edition 2.1) forms the basis for CAN/CSA-C22.2 No. 60335-2-78, which contains the following deviations in addition to those shown in CAN/CSA-C22.2 No. 60335-1-11. [Replace all references to “IEC 60335-1” with “CAN/CSA-C22.2 No. 60335-1”] 1 Scope [Add the following] This Standard covers the above-noted products that are intended to be…

1 PURPOSE AND SCOPE This standard specifies the test method to determine the relation between the water content and the dry density of soil and soil aggregates mixes when they are compacted in a standard mould by a 2,495 kg rammer dropped from a height of 305 mm. Three methods are used to determine this relation (see Chapter 5). NOTE — The laboratory compaction test methods described in this…

1 PURPOSE AND SCOPE This standard specifies the test method to determine the relation between the water content and the dry density of soil and soil aggregates mixes when they are compacted in a standard mould by a 4,536 kg rammers dropped from a height of 457 mm. Three methods are used to determine this relation (see Chapter 5). NOTE — The laboratory compaction test methods described in…

IEC 60335-1:2010+A1:2013 deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Battery-operated appliances and other d.c. supplied appliances are within the scope of this standard. Appliances not intended for normal household use but which nevertheless may be a…

Scope 1.1 This Standard applies to clock-operated switches, rated 600 V or less, designed to be used in ordinary locations to close and open circuits to a load at predetermined intervals, and intended to be employed in accordance with the Rules of the Canadian Electrical Code, Part I. The clock-operated switches discussed in this Standard may be a) completely enclosed, plug-in, or cord-…

Scope 1.1 This Standard includes requirements for a quality management system (QMS) that addresses safety of personnel in perioperative environments including requirements for a) establishing a QMS; b) OHS; c) policies and SOPs, clinical practice standards, and documentation; d) personnel qualifications and training; e) work areas and equipment; f) infection, prevention…