1 Scope
1.1
This Standard provides requirements, recommendations, and guidance for understanding the potential risks to biomass supply chains, including the following risk categories and associated risk factors:
a)
supplier risk (including credit-worthiness/problematic future solvency of supplier; supplier contracts; supply inventory; conflicts of interest/vested interest with competing…
Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines (“toupies”)
1 Scope
This document gives the safety requirements and measures for stationary and displaceable hand-fed single spindle vertical moulding machines, hereinafter referred to as “machines”, designed to cut wood and materials with similar physical characteristics to wood.
NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085-1:2017, 3.4 and 3.5.
It deals with all…
Woodworking machines — Safety — Part 8: Belt sanding and calibrating machines for straight workpiece...
1 Scope
This document gives the safety requirements and measures for stationary calibrating and sanding machines, with an integrated feed and one or more sanding belt units positioned above and/or below the work piece level, with manual or automatic loading and/or unloading, hereinafter referred to as “machines”.
It deals with all significant hazards, hazardous situations and events as listed…
1 Scope
1.1 General
This Standard establishes minimum requirements for pressure relief devices intended for use on fuel containers that comply with CSA/ANSI HGV 2, CSA B51, Part 2, or SAE J2579.
Pressure relief devices designed to comply with this Standard are intended to be used with hydrogen fuel complying with SAE J2719 or ISO 14687.
Pressure relief devices may be of any design or…
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-0...
1 Scope and object
This clause of Part 1 is applicable except as follows:
1.1.1 Equipment included in scope
Replacement:
Replace the existing text with the following:
This part of IEC 61010 specifies safety requirements for electrical equipment intended for
sterilization, washing, and disinfection of medical materials in the medical, veterinary,
pharmaceutical and laboratory fields, when…
Cards and security devices for personal identification — Test methods — Part 6: Contactless proximit...
1 Scope
The ISO/IEC 10373 series defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross-referenced to one or more base standards, which can be ISO/IEC 7810 or one or more of the supplementary standards that define the information storage technologies employed in identification card applications.
NOTE 1…
Information technology — Multimedia content description interface — Part 6: Reference software
1 Scope
The ISO/IEC 15938 series operates on and generates conformant bitstreams. This document provides a specific implementation that behaves in a conformant manner.
NOTE 1 Other implementations that conform to the ISO/IEC 15938 series are possible, which do not necessarily use the algorithms or the programming techniques of the reference software.
The software contained in this document is…
Telecommunications and exchange between information technology systems — Requirements for local and ...
Scope
The scope of this standard is to specify provision of connectionless user data confidentiality, frame data
integrity, and data origin authenticity by media access independent protocols and entities that operate
transparently to MAC Clients.
NOTE—The MAC Clients are as specified in IEEE Std 802®, IEEE Std 802.1Q™, and IEEE Std 802.1X.2
To this end, it
a) Specifies the requirements to…
Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
IEC 61290-1-3:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
IEC 61290-1-3:2021 applies to all commercially available optical amplifiers (OA) and optically amplified subsystems…
Standard for Devices for Detection, Monitoring or Control of Plumbing Systems
1.1 General
1.1.1 This standard covers devices for detection, monitoring or control of water supply and
distribution systems in sizes DN 8 to DN 300 (NPS-1/4 to NPS-12) for commercial and residential
applications and specifies requirements for materials, performance testing, environmental
limitations, installation, and markings.
1.1.2 Devices for detection, monitoring or control of plumbing…