Rechercher

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10609-47:1995. 1 Scope 1.1 General ISO/IEC ISP 10609 is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode…

2 Scope 2.1 General 2.1.1 The scope of this Standard is limited to the teleco mmunications aspect of commercial building design and construction, encompassing telecommunications considerations both within and between buildings. Telecommunications aspects are generally the pathways into which telecommunications media are placed and the rooms and areas associated with the building used…

1 Scope 1.1 This Standard specifies the requirements for metal cable trays and associated fittings for the support of cables, insulated conductors, and raceways designed for use in accordance with the rules of the Canadian Electrical Code (CEC) Part I, and the National Electrical Code (NEC).

This National Standard of Canada is based on International Standard ISO 11140-1:1995. 1 Scope This part of ISO 11140 specifies performance requirements for indicators that show exposure to sterilization processes by means of physical and/or chemical change of substances. NOTE 1 These indicators are used to monitor the presence or attainment of one or more of the parameters required…

This National Standard of Canada is equivalent to International Standard ISO 14041:1998. 1 Scope This International Standard in addition to ISO 14040 specifies the requirements and the procedures necessary for the compilation and preparation of the definition of goal and scope for a Life Cycle Assessment (LCA), and for performing, interpreting and reporting a Life Cycle Inventory…

Purpose of Standard This National Standard of Canada has been reviewed and adopted for Canadian use by the CGSB Committee on Metrology - Terminology and OIML. It is identical in content and in layout, without editorial changes, with the ISO document, International vocabulary of basic and general terms in metrology, published in 1993.

This National Standard of Canada is equivalent to International Standard ISO 3600:1996. 1 Scope This International Standard gives guidance for the content and presentation of operator's manuals for tractors, machinery for agriculture and forestry, and powered lawn and garden equipment. It is intended to assist manufacturers of tractors, machinery for agriculture and forestry, and powered…

This National Standard of Canada is equivalent to International Standard ISo 10012-2:1997. 1 Scope 1.1 This part of ISO 10012 contains quality assurance recommendations that may be used by a Supplier to provide enhanced assurance that measurements are made with the intended accuracy. It also contains guidance on the implementation of the recommendations. 1.2 It is also intended to…

This National Standard of Canada is based on International Standard IEC 1048:1991, including Technical Corrigendum 1:1992 and Amendment 1:1995. 1.1 Scope This International Standard states the requirements for both self-healing and non-self-healing continuously rated a.c. capacitors of up to and including 2,5 kvar, and not less that 0,1 µF, having a rated voltage not exceeding 1 000 V,…

This National Standard of Canada is equivalent to International Standard ISo 10006:1997. 1 Scope These guidelines use project management processes to serve as a framework to discuss their application. This International Standard is applicable to projects of varying complexity, small or large, of short or long duration, in different environments, and irrespective of the kind of…