Medical Electrical Equipment - Part 2-4: Particular Requirements for the Safety of Cardiac Defibrill...
This National Standard of Canada is equivalent to International Standard IEC 60601-2-4:2002.
1 Scope and object
This clause of the General Standard applies except as follows:
*1.1 Scope Addition:
This Particular Standard specifies requirements for the safety of CARDIAC DEFIBRILLATORS as defined in 2.1.101, hereinafter referred to as EQUIPMENT.
This Particular Standard does not apply to…
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Elec...
This National Standard of Canada is equivalent to International Standard IEC 60601-1-2:2001 (second edition, 2001-09).
1 Scope and object
1.201 Scope
This standard applies to ELECTROMAGNETIC COMPATIBILITY of MEDICAL ELECTRICAL EQUIPMENT and MEDICAL ELECTRICAL SYSTEMS, hereinafter referred to as EQUIPMENT and SYSTEMS, respectively.
1.202 Object
This standard specifies requirements and tests for…
Medical electrical equipment - Part 2-17: Particular requirements for the safety of automatically-co...
This National Standard of Canada is equivalent to International Standard IEC 60601-2-17:04, second edition.
1 Scope and object
This clause of the General Standard applies except as follows:
1.1 Scope
Addition:
1.1.101 This Particular Standard specifies requirements for the safety of automaticallycontrolled
EQUIPMENT for BRACHYTHERAPY of patients using AFTERLOADING techniques.
1.1.102 This…
Medical Electrical Equipment - Part 2-5: Particular Requirements for the Safety of Ultrasonic Physio...
This National Standard of Canada is equivalent to International Standard IEC 60601-2-5:2000.
1.1 Scope
Addition:
This Particular Standard specifies the requirements for safety of ULTRASONIC PHYSIOTHERAPY EQUIPMENT used in medical practice, as defined in 2.1.101.
This Particular Standard does not apply to:
- EQUIPMENT in which a tool is driven by ULTRASOUND (for example EQUIPMENT…
Backwater Valves and Check Valves Made of Cast
Iron or Thermoplastic Used in Drainage Systems -
Char...
SCOPE
This standard applies to backwater valves designed to be used in drainage systems (see note) and to
check valves designed to be used in drainage systems that do not drain by gravity to the building
sewer, in compliance with the requirements of the National Plumbing Code of Canada - 2005.
NOTE - The National Plumbing Code of Canada - 2005 defines the term drainage system as follows:
"…
This CSA Standard is joint with UL Standard 1786.
1 Scope
1.1
This Standard applies to direct plug-in nightlights not exceeding 10 W input, for indoor use only, in non-hazardous locations and intended to be used in accordance with the Canadian Electrical Code, Part I, CSA C22.1, and the National Electrical Code, ANSI/NFPA 70. Light source types include incandescent candelabra base lamps,…
This CSA Standard is joint with both UL 486D and NMX-J-519-ANCE-05.
1 Scope
1.1
The requirements in this standard cover sealed wire connector systems, including insulating caps, covers, resins, tubing, and tapes provided with, or for use with, specific wire connectors. These systems are intended for wet or damp locations, and other installations such as direct burial, below grade, or above…
1.1 Scope
1.1.1This standard applies to newly produced vented gas fireplace heaters (See Part IV, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials:
a.For use with natural gas;
b.For use with liquified petroleum (propane);
c.Direct vent appliances for manufactured home (USA only) or mobile home OEM installation convertible…
1. Scope
1.1
This Standard covers commercial, freestanding, under-counter, and counter-insert dishwashers,utensil-washers, and glass washers using water as the principal cleaning medium, hereafter referred to as dishwashers. These dishwashers utilize steam, gas, or electric heaters for heating water. Heated water is provided to a dishwasher by means of steam, gas, or electric heating systems…
Washer-disinfectors — Part 5: Test soils and methods for demonstrating cleaning efficacy
ISO/TS 15883-5:2005 includes the test soils and methods that can be used to demonstrate the cleaning efficacy of washer-disinfectors (WD) according to the ISO 15883 series of standards.
The inclusion of the test soils and methods in ISO/TS 15883-5:2005 does not indicate that they are of equivalent sensitivity in their determination of cleaning efficacy.
Acceptance criteria are included, based…