Rechercher

Preface The primary objective of this Handbook is to provide both novice and experienced quality practitioners with a concise, user-friendly guide to understanding and implementing the requirements of ISO 13485 as it relates to their quality management system (QMS). The Canadian National Standard CAN/CSA-ISO 13485:03 is identical to its international counterpart, ISO 13485:03. To facilitate…

This National Standard of Canada is based on International Standard ISO 8835-5:2004. 1 Scope IEC 60601-1:1988, Clause 1 applies except as follows: This part of ISO 8835 specifies particular requirements for the essential performance of anaesthetic ventilators (as defined in 3.1). This part of ISO 8835 is applicable to anaesthetic ventilators which are always a component of an anaesthetic…

1 Scope 1.1 This Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters intended for protection of personnel, for use only in grounded neutral systems in accordance with the National Electrical Code (NEC), ANSI/NFPA 70, the Canadian Electrical Code, C22.1(CEC), and Electrical Installations(Use), NOM-001-SEDE. These devices are intended for use on alternating…

This National Standard of Canada is based on International Standard ISO 14161:2000. 1 Scope This International Standard provides guidance for the selection, use and interpretation of results from application of biological indicators when used in the development, validation and routine monitoring of sterilization processes. This International Standard applies to biological indicators for…

This National Standard of Canada is equivalent to International Standard ISO 14341:2002. 1 Scope This International Standard specifies requirements for classification of wire electrodes in the as-welded condition and in the post weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 N/mm2 or a minimum…

Cette norme CSA est commune avec UL 486D et NMX-J-519-ANCE-05. 1 Domaine d'application 1.1 Cette norme vise les connecteurs de fils scellés, y compris les capuchons isolants, les couvercles, les résines, les tubes et les rubans isolants qui équipent les connecteurs de fils ou pour utilisation avec ces derniers. Ces connecteurs sont conçus pour utilisation dans les emplacements mouillés ou…

This National Standard of Canada is equivalent to International Standard ISO 19900:2002. 1 Scope This International Standard specifies general principles for the design and assessment of structures subjected to known or foreseeable types of actions. These general principles are applicable worldwide to all types of offshore structures including bottom-founded structures as well as floating…

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-82:2005. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for singlephase appliances and 480 V for other appliances. NOTE 101…

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-12:2005. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric warming plates, warming trays and similar appliances intended to keep food or vessels warm, for household and similar purposes, their rated voltage being not more than 250 V.…

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-59:2005. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric insect killers for household and similar purposes, their rated voltage being not more than 250 V. Appliances not intended for normal household use but that nevertheless may be…