Rechercher

Scope 1.1 This Standard applies to single-polarity, hand- or tool-applied splicing wire and cable connectors intended for use with all alloys of copper, aluminum conductors, or copper-clad aluminum conductors, or all three, in accordance with the Canadian Electrical Code Part I, C22.1, in Canada, the National Electrical Code, NFPA-70, in the United States of America, or the Standard for…

This National Standard of Canada is equivalent to International Standard CEI/IEC 335-2-52: 1994 (second edition, 1994-06). 1 Scope This clause of part 1 is replaced by: This standard deals with the safety of electric oral hygiene appliances for household and similar purposes, their rated voltage being not more than 250 V. NOTE 1 - Examples of appliances covered by this standard are - tooth…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10609-9:1992. The amendment to this standard was reaffirmed separately on 2005-08-10. 1 Scope This part of ISO/IEC ISP 10609 is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively…

This National Standard of Canada is based on International Standard ISO 3450:1996, (third edition, 1996-04-01). 1 Scope This International Standard specifies minimum performance and test criteria for brake systems to enable uniform assessment of the braking capability of earth-moving machinery which operates on work sites or travels on public roads. Service secondary, and parking brake systems…

This National Standard of Canada is equivalent to International Standard ISO/IEC 14776-381:2000 (first edition, 2000-06). 1 Scope This standard defines the command set extensions to facilitate operation of optical memory card devices. The clause(s) of this standard pertaining to optical memory card device class, implemented in conjunction with the applicable clauses of the ISO/IEC 14776-311…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-2-40:1998, (first edition, 1998-02). 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard applies to ELECTROMYOGRAPHS as defined in 2.1.101 and EVOKED RESPONSE EQUIPMENT as defined in 2.1.102, hereinafter referred to as…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15507:1997. 1 Scope This International Standard specifies the signalling protocol for the support of clock synchronization (SYNC-SIG) between Private Integrated Services Network Exchanges (PINXs) connected together within a Private Integrated Services Network (PISN). This protocol supports the…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15411:1999. 1 Scope This International Standard defines the differing requirements necessary when considering the various types of segmented keyboards. The scope of this International Standard encompasses the three-dimensional layout of segmented, traditional style keyboards classified as having: a.…

This National Standard of Canada is equivalent to International Standard CISPR 22:1993. 1 Scope and object This standard applies to ITE as defined in 3.1. Procedures are given for the measurement of the levels of spurious signals generated by the ITE and limits are specified for the frequency range 9 kHz to 400 GHz for both Class A and Class B equipment. No measurements need be…

This National Standard of Canada is equivalent to International Standard ISO 1100-2:1982. This International Standard specifies methods of determining the stage-discharge relation for a gauging station. A sufficient number of discharge measurements complete with corresponding stage measurements is required to permit the stage-discharge relation to be determined to the accuracy required by this…