Rechercher

This National Standard of Canada is equivalent to International Standard IEC 60601-2-45:1998, first edition, 1998-09. 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard contains requirements for the safety of X-RAY EQUIPMENT designed for mammography and MAMMOGRAPHIC STEREOTACTIC DEVICES. 1.2 Object Replacement:…

This National Standard of Canada is equivalent to International Standard ISO/IEC 10116:1997. 1 Scope This International Standard describes four modes of operation for an n-bit block cipher. NOTE - Annex A (informative) contains comments on the properties of each mode. This International Standard establishes four defined modes of oper ation so that in applications of an n-bit…

This National Standard of Canada is equivalent to International Standard ISO 7199:1996. 1 Scope This International Standard specifies requirements for sterile, single-use, extracorporeal blood-gas exchangers (oxygenators) intended for supply of oxygen to, and removal of carbon dioxide from, the blood of humans. This International Standard also applies to heat exchangers that are…

This National Standard of Canada is equivalent to International Standard CEI/IEC 601-2-23:1993. 1.1 Scope This Particular Standard specifies the particular requirements for the safety of TRANSCUTANEOUS PARTIAL PRESSURE MONITORING EQUIPMENT as defined in 2.101, hereinafter referred to as EQUIPMENT. This Standard applies to transcutaneous monitors used with adults, children and neonates…

This National standard of Canada is equivalent to International Standard ISO 6011:1987. 1. Scope This Standard specifies the information to be obtained from the instruments on the instrument panel by the operator in his normal position. It also specifies the arrangement and colour distinction of this instrumentation in order to make it possible to operate the machine in a safe and…

This National Standard of Canada is equivalent to International Standard ISO 9004-1987. It describes a basic set of elements by which quality management systems can be developed and implemented. The selection of appropriate elements contained in this International Standard and the extent to which these elements are adopted and applied by a company depends upon factors such as market…

This National Standard of Canada is equivalent to International Standard IEC 61029-2-10:1998, first edition, 1998-06. 1 Scope This clause of part 1 is applicable, except as follows: 1.1 Addition: This standard applies to cutting-off grinders intended mainly for cutting metal with a plain abrasive cutting-off wheel whose diameter does not exceed 406 mm and has a rated peripheral speed not…

This National Standard of Canada is equivalent to International Standard CEI/IEC 1232:1993 (first edition, 1993-06). Scope This International Standard applies to bare, hard-drawn, round, aluminum-clad wires of different electrical and mechanical properties, in the diameter ranges shown in table 5, for electrical purposes, before stranding. It is intended to cover applications, for…

Scope This National Standard of Canada applies to terry washcloths. It states the requirements for cotton and cotton/ polyester commercial and utility/institutional washcloths. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This standard does not purport to address all the safety aspects associated with…

This National Standard of Canada is equivalent to International Standard ISO/IEC 18045:2008. 1 Scope This International Standard is a companion document to the evaluation criteria for IT security defined in ISO/IEC 15408. It defines the minimum actions to be performed by an evaluator in order to conduct an ISO/IEC 15408 evaluation, using the criteria and evaluation evidence defined in ISO…