Rechercher

1. SCOPE 1.1 This Standard sets forth minimum requirements for emergency valves that are intended to be used for the control of flammable and combustible liquids which are handled at temperatures within the range of -40 ° to +50 °C. For the purpose of this Standard, flammable and combustible liquids mean gasoline, fuel oil, kerosene and diesel fuel, including gasoline with small amounts of…

This National Standard of Canada is based on International Standard IEC/TR 61400-24:2002. 1 Scope During the last few years, all major wind turbine manufacturers have made dedicated efforts towards developing adequate lightning protection systems, and the first experiences with these new designs are beginning to be seen. It is therefore reasonable at this time to consider and prepare for a…

This National Standard of Canada is based on International Standard CEI/IEC 62282-2:2004. 1 Scope This part of IEC 62282 provides the minimum requirements for safety and performance of fuel cell modules. This standard applies to fuel cell modules with the following electrolyte chemistry: - alkaline; - proton exchange membrane (including direct methanol fuel cells); - phosphoric acid; -…

1. SCOPE 1.1 This Standard sets forth minimum requirements for steel, non-pressure tanks that are used for the aboveground storage of flammable and combustible liquids such as gasoline, fuel oil, or similar products with a relative density not greater than 1.0. NOTE: These tanks may also be used for the storage of used oil. For tanks intended solely for the collection of used oil, refer to ULC-…

1. DOMAINE D'APPLICATION 1.1 La présente norme énonce les exigences minimales relatives aux réservoirs non pressurisés en acier utilisés pour le stockage hors sol de liquides inflammables et combustibles comme l'essence, le mazout ou des produits similaires ayant une densité relative d'au plus 1,0. REMARQUE : Ces réservoirs peuvent également servir au stockage d'huile usagée…

This National Standard of Canada is based on International Standard CEI/IEC 62301:2005. 1 Scope This International Standard specifies methods of measurement of electrical power consumption in standby mode. It is applicable to mains powered electrical household appliances and to the mains powered parts of appliances that use other fuels such as gas or oil. This standard does not specify…

This National Standard of Canada is based on International Standard ISO 22870:2006. 1 Scope This International Standard gives specific requirements applicable to point-of-care testing and is intended to be used in conjunction with ISO 15189. The requirements of this International Standard apply when POCT is carried out in hospital, clinic and by a healthcare organization providing ambulatory…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15414:2006. 1 Scope This Recommendation | International Standard provides: a) a language (the enterprise language) comprising concepts, structures, and rules for developing, representing, and reasoning about a specification of an ODP system from the enterprise viewpoint (as defined in ITU-T Rec. X.903 | ISO/IEC…

This National Standard of Canada is equivalent to International Standard ISO/IEC 17341:2006. 1 Scope This International Standard specifies the mechanical, physical and optical characteristics of 120 mm rewritable optical disks with capacities of 4,7 GB and 9,4 GB. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby…

This National Standard of Canada is equivalent to International Standard ISO/IEC 19757-2:2003. 1 Scope This part of ISO/IEC 19757 specifies RELAX NG, a schema language for XML. A RELAX NG schema specifies a pattern for the structure and content of an XML document. The pattern is specified by using a regular tree grammar. This part of ISO/IEC 19757 establishes requirements for RELAX NG…