Rechercher

Scope 1.1 This Standard provides a calculation method for determining the heat loss and heat gain of buildings (as described in Clause 1.3 below) for the purpose of selecting the appropriate output capacity of a space heating appliance or group of appliances and the output capacity of a cooling appliance or group of appliances. 1.2 This Standard also provides restrictions on selecting the…

This Standard provides requirements for the design and evaluation of building components of fibre-reinforced polymers (FRP) in buildings and of building components reinforced with FRP materials. It is based on limit states design principles and is consistent with the National Building Code of Canada. This Standard does not apply to the design of fibre-reinforced concrete (FRC), except for FRC…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric air-cleaning appliances for household and similar purposes, their rated voltage being not more than 250 V for singlephase appliances and 480 V for other appliances. Appliances not intended for normal household use but that nevertheless may be a source of danger to…

This National Standard of Canada is equivalent to International Standard ISO 14937:2009. 1 Scope 1.1 Inclusions 1.1.1 This International Standard specifies general requirements for the characterization of a sterilizing agent and for the development, validation and routine monitoring and control of a sterilization process for medical devices. NOTE Although the scope of this…

This National Standard of Canada is equivalent to International Standard ISO 14341:2010. 1 Scope This International Standard specifies requirements for classification of wire electrodes and weld deposits in the as-welded condition and in the post-weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 MPa…

1.1 This Standard prescribes the methodology for verifying and documenting that all interconnections between systems provided for fire protection and life safety functions are installed and operating in conformance with their design criteria. Refer to Appendix A1.1. 1.2 This Standard is intended to satisfy the requirement for integrated systems testing in the National Building Code of Canada…

This National Standard of Canada is based on International Standard IEC 61730-2:2004. 1 Scope and object This part of IEC 61730 describes the testing requirements for photovoltaic (PV) modules in order to provide safe electrical and mechanical operation during their expected lifetime. Specific topics are provided to assess the prevention of electrical shock, fire hazards, and personal…

This National Standard of Canada is based on International Standard IEC 61730-1:2004. 1 Scope and object This part of IEC 61730 describes the fundamental construction requirements for photovoltaic (PV) modules in order to provide safe electrical and mechanical operation during their expected lifetime. Specific topics are provided to assess the prevention of electrical shock, fire hazards…

1.1 This Standard sets forth the minimum requirements for metallic and composite primary carrier, secondary containment, normal vent and vapour recovery and integral primary/secondary pipe systems (pipe and fittings) intended for underground use in distribution and venting applications of petroleum-based flammable liquids and combustible liquids, alcohols, and alcohol-blended fuels as…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-5:2009. 201.1.1 Scope Replacement: This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ULTRASONIC PHYSIOTHERAPY EQUIPMENT as defined in 201.3.216, hereafter referred to as ME EQUIPMENT. This standard only relates to ULTRASONIC PHYSIOTHERAPY EQUIPMENT employing a…