Non-recirculating direct gas-fired industrial air heaters
Scope
1.1
This standard applies to newly produced, direct gas-fired industrial air heaters of the non-recirculating type, hereinafter referred to as heaters, whose purpose is to offset building heat loss. All air to the heater shall be ducted directly from outdoors and the products of combustion generated by the heater are released into the air stream being heated.
Heaters covered by this…
Grounding and bonding equipment (Tri-national standard, with NMX-J-590-ANCE and UL 467)
Scope
1.1 This Standard applies to grounding and bonding equipment for use in accordance with the Canadian Electrical Code, Part I, CSA C22.1, in Canada, the National Electrical Code, NFPA 70, in the United States, or the Standard for Electrical Installations, NOM-001-SEDE, in Mexico.
1.2 This Standard applies to the following grounding and bonding equipment:
a) ground clamps, bonding…
Safety of Household and Similar Electrical Appliances — Part 2-34:Particular Requirements for Motor-...
1 Scope
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of sealed (hermetic and semi-hermetic type) motorcompressors,
their protection and control systems, if any, which are intended for use in equipment for
household and similar purposes and which conform with the standards applicable to such equipment. It
applies to motor-…
Standard for Suspended Ceiling Grid Low Voltage Systems and Equipment
1.1 These requirements cover suspended ceiling grid low voltage systems and equipment intended for
installation and use in accordance with the:
In Canada:
Canadian Electrical Code, Part I, Safety Standard for Electrical Installations, CSA
C22.1,
In the United States:
National Electrical Code (NEC), ANSI/NFPA 70.
1.2 The suspended ceiling grid low voltage systems covered by this standard…
Electric vehicle supply equipment (Tri-national standard, with UL 2594 and NMX-J-677-ANCE-2013)
Scope
1.1 This standard applies to metallic OUTLET BOXES, flush-DEVICE BOXES, FLOOR BOXES, CONCRETE BOXES, EXTENSION RINGS, covers, CONDUIT BODIES, BAR HANGERS, bar-hanger assemblies, and all accessories whose principal function is for support of boxes. The products covered by this standard are intended for installation in accordance with the National Electrical Code (NEC), NFPA 70, the Canadian…
Metallic outlet boxes (Tri-national standard, with UL 514A and ANCE NMX- J-023/1)
Scope
1.1 This standard applies to metallic OUTLET BOXES, flush-DEVICE BOXES, FLOOR BOXES, CONCRETE BOXES, EXTENSION RINGS, covers, CONDUIT BODIES, BAR HANGERS, bar-hanger assemblies, and all accessories whose principal function is for support of boxes. The products covered by this standard are intended for installation in accordance with the National Electrical Code (NEC), NFPA 70, the Canadian…
Wire connectors (Tri-national standard, with UL 486A-486B and NMX-J-543-ANCE)
Scope
1.1 This Standard applies to single-polarity connectors for use with all alloys of copper or aluminum, or copper-clad aluminum conductors, or all three, for providing contacts between current-carrying parts, in accordance with the Canadian Electrical Code, Part I, C22.1, in Canada, the National Electrical Code, NFPA-70, in the United States of America, or the Standard for Electrical…
Splicing wire connectors (Tri-national standard, with UL 486C and NXM-J- 548-ANCE)
Scope
1.1 This Standard applies to single-polarity, hand- or tool-applied splicing wire and cable connectors intended for use with all alloys of copper, aluminum conductors, or copper-clad aluminum conductors, or all three, in accordance with the Canadian Electrical Code Part I, C22.1, in Canada, the National Electrical Code, NFPA-70, in the United States of America, or the Standard for…
Positioning devices (Bi-national standard, with UL 1565)
Scope
1.1 This standard applies to those metallic and nonmetallic devices used for positioning - which may include bundling and securing - or to a limited extent supporting cable, wire, conduit, or tubing of a wiring system in electrical installations, to reduce the risk of fire, electric shock, or injury to persons. This standard applies to, but is not limited to, cable clamps, cable and…
The ISO 50001 Essentials - Energy Management Systems Implementation Guideline
Detailed Information
Objective of this handbook
This is the first edition of the ISO 50001 essentials handbook. The objective of this handbook is to provide user-friendly guidance to enterprises who wish to implement an ISO 50001-conformant Energy Management System (EnMS), and in the longer term to accomplish continual improvement in energy performance through effective operation and maintenance…
