Rechercher

1 Scope 1.1 [Replace this clause with the following] This Standard contains technical requirements and practices including test methods applicable to the design, manufacture/construction, installation, and labelling of corded window covering products. The requirements provided in this Standard are intended to minimize the hazards posed to young children by corded window covering products.…

Scope 1.1 This standard applies to pin and sleeve type plugs, receptacles, power inlets, and connectors, rated up to 800 amperes and up to 600 volts ac or dc, and which may include up to eight pilot contacts. These devices are intended to provide power from branch circuits, or are for direct connection to the branch circuit in accordance with the Canadian Electrical Code Part I (CEC), C22.1, and…

1 Scope This National Standard of Canada defines equipment requirements, performance criteria, and operating and testing procedures for the implementation of a vapour control system (VCS) in gasoline distribution networks including terminals, bulk plants, service stations and cargo tanks, commonly known as Stage I. ( See Figure 1 for a schematic representation). This standard does not…

1 Scope This National Standard of Canada applies to automotive fuel composed of 50 to 85% by volume denatured fuel ethanol and gasoline strictly for use in flexible fuel vehicles over a wide range of climatic conditions. Fuel produced to this standard is not for use in conventional vehicles designed to operate on gasoline containing up to 10% by volume ethanol. Precautions for the use of…

1 SCOPE 1.1 These requirements apply to materials for the fabrication of air duct systems for use in accordance with the requirements in the National Building Code of Canada. The materials covered by these requirements include preformed lengths of flexible or rigid ducts, materials in the form of boards for field fabrication of lengths of rigid ducts, and preformed flexible connectors.

This standard applies, when required by the relevant product standard, to switchgear and controlgear hereinafter referred to as ²equipment² and intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c. It does not apply to low-voltage switchgear and controlgear assemblies which are dealt with in IEC 60439. NOTE – In certain clauses or…

Scope 1.1 These requirements cover FITTINGS for use with cable and conduit intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code (CEC), Part I, CSA C22.1, and the Standard for Electrical Installations, NOM-001-SEDE. 1.2 These requirements cover CONDUIT LOCKNUTS, conduit BUSHINGS, metal stud BUSHINGS, CONDUIT BODIES, and entrance…

Scope 1.1 There is a need in the Canadian marketplace for guidance on solar photovoltaic rooftop installation, as photovoltaic modules are not currently addressed in many of the building codes. This guideline is intended to outline best practices for rooftop solar photovoltaic systems by addressing the following: (a) structural analysis of the building itself resulting from the solar…

1 Scope This National Standard of Canada applies to Research Ethics Boards (REBs) that evaluate applications for ethical acceptability. If an REB grants ethics approval to conduct biomedical clinical trials, it will provide research ethics oversight of biomedical clinical trials that are subject to the Food and Drugs Act and applicable Regulations (see 2.1). This Standard does not preclude…

Scope 1.1 This Standard covers clothes washing appliances for household and residential style commercial use (e.g., a coin-operated appliance in an apartment building) included within the scope of the U.S. Department of Energy (DoE) and Natural Resources Canada (NRCan) minimum energy performance requirements. This includes the following product categories: (a) top loading, compact (less than 1…