Rechercher

1.1 This Standard covers minimum requirements for shop fabricated aboveground protected tank assemblies that are used for the storage of flammable and combustible liquids with a specific gravity not greater than 1.0, that are compatible with the material of construction. 1.2 These protected tank assemblies consist of primary tanks provided with secondary containment and protective encasement…

1.1 This fire test method is applicable to door assemblies (comprising doors, frame products, hardware, glazing materials, and other parts, accessories or components) of various materials and types of construction, for use as closures in openings in walls and partitions that are fire separations in accordance to the National Building Code of Canada. 1.1.1 This test method is also applicable…

1.1 This fire test method is applicable to window and glass block assemblies and other light transmitting assemblies, for use as closures in openings in walls and partitions that are fire separations in accordance to the National Building Code of Canada. 1.2 It is the intent that the tests made in conformity with this Standard will develop data to enable regulatory bodies to determine the…

1.1 This Standard applies to newly produced automatic valves (see Clause 3, Definitions) constructed entirely of new, unused parts and materials. These valves may be individual automatic valves or valves utilized as parts of automatic gas ignition systems. This Standard also applies to commercial/industrial safety shutoff valves (see Clause 3), herein after referred to as C/I valves. This…

1.1 This Standard applies to the construction, performance, and installation procedures for a newly produced automatic damper device (hereinafter referred to as device) constructed entirely of new, unused parts and materials and designed to control the flow or products of combustion from an individually, automatically operated, gas-fired appliance listed by a nationally recognized testing…

1.1 This Standard applies to newly produced outdoor cooking gas appliances (see Clause 3) constructed entirely of new, unused parts and materials. Outdoor cooking gas appliances submitted for examination under this Standard are classified as portable, stationary, or built-in. 1.2 This Standard applies to outdoor cooking gas appliances mounted to the exterior of a recreational vehicle (RV…

1.1 This Standard is intended for manufacturers and purchasers of machinery that is sold in, imported to, or exported from Canada. It is also intended for regulators, acoustical professionals, and other interested parties. 1.2 This Standard is intended to provide a) guidance on the steps required to provide and verify noise emission declarations for machinery and equipment intended for the…

1.1 This Standard covers the refurbishing of shop fabricated tanks built to nationally recognized Standards listed in Tank Eligibility Subsections 6.2 and 7.2. NOTE: In the context of this Standard, refurbishing refers to repairs to, and a limited set of modifications of, tanks using materials at least equivalent to those used in the original manufacture and does not include retrofit. Refer to…

1 Scope This International Standard deals with the safety of electric motor-operated or magnetically driven: – HAND-HELD TOOLS (IEC 62841-2); – TRANSPORTABLE TOOLS (IEC 62841-3); – LAWN AND GARDEN MACHINERY (IEC 62841-4). The above listed categories are hereinafter referred to as ²tools² or ²machines². The RATED VOLTAGE is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V…

This is the third edition of CAN/CSA-C22.2 No. 60601-2-11, Medical electrical equipment — Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60601-2-11 (third edition, 2013-01). It supersedes the previous…