Rechercher

1. Scope 1.1 These requirements cover single and double wall cylindrical vertical steel non-pressure tanks that are used for the aboveground storage of flammable liquids and combustible liquids such as gasoline, fuel oil, or similar products with a relative density not greater than 1.0. 1.2 Section 3 of these requirements cover single wall tanks. Section 4 of these requirements cover…

1. Scope 1.1 These requirements cover single and double wall cylindrical horizontal steel non-pressure tanks that are used for the aboveground storage of flammable liquids and combustible liquids such as gasoline, fuel oil, or similar products with a relative density not greater than 1.0. 1.2 Section 3 of these requirements cover single wall tanks. 1.3 Section 4 of these requirements…

This National Standard of Canada is equivalent to International Standard ISO 105-A01:1989. 1.1 This Standard provides general information about the methods for testing colour fastness of textiles for the guidance of users. The uses and the limitations of the methods are pointed out, several terms are defined, an outline of the form of the methods is given and the contents of the clauses…

This National Standard of Canada is equivalent to International Standard ISo 5654/1:1984. It specifies the dimensional, physical and magnetic characteristics of the cartridge, so as to provide physical interchangeability between data processing systems. NOTE - Numeric values in the SI and/or Imperial measurements system in this Standard may have been rounded and therefore are consistent…

This National Standard of Canada is equivalent to International Standard ISo 7065/1:1985. It specifies the dimensional, physical and magnetic characteristics of the cartridge, so as to provide physical interchangeability between data processing systems. NOTE - Numeric values in the SI and/or Imperial measurement systems in this Standard may have been rounded and therefore are consistent…

This National Standard of Canada is equivalent to International Standard ISo 7487/1:1985. It specifies the dimensional, physical and magnetic characterisitcs of the cartridge so as to provide physical interchangeability between data processing systems. NOTE - Numeric values in the SI and/or Imperial measurement system in this Standard may have been rounded off and therefore are…

This National Standard of Canada is equivalent to International Standard ISo 7487/2:1985. It specifies the quality of recorded signals, the track layout, and a track format to be used on such a flexible disk cartridge, which is intended for data interchange between data processing systems. NOTE - Numeric values in the SI and/or Imperial measurement system in this Standard may have been…

This National Standard of Canada is equivalent to International Standard ISo 8378/3: 1986. It specifies the quality of recorded signals, the track layout, and a track format to be used on 130 mm (5.25 in) flexible disk cartridges intended for data interchange between data processing systems. NOTE - Numeric values in the SI and/or Imperial measurement system in this Standard may have…

1.1 This Standard provides the general requirements used in the design, construction, testing, and commissioning of concrete containment structures for CANDU nuclear power plants designated as class containment and is directed to the owners, designers, manufacturers, fabricators, and constructors of the concrete components and parts. Note: The requirements of the N287 Series of CSA Standards…

1.1 SCOPe 1.1.1 This standard applies to automatically operating gas-fired central furnaces (see Part XI, Definitions), hereinafter referred to as furnaces, for installation in residential, commercial, and industrial structures including furnaces for Direct Vent, Recreational Vehicle, Outdoor, and Manufactured (Mobile) Homes. These furnaces may include a cooling unit. All units shall…