Rechercher

This National Standard of Canada is joint with UL 745-2-5 and based on IEC 745-2-5. 1. Scope This clause of Part 1 is applicable except as follows: 1.1 First sentence Replacement: This standard applies to hand-held electric motor-operated circular saws and circular knives.

This National Standard of Canada is joint with UL 745-2-34 and IEC 745-1. 1. Scope This clause of Part 1 is applicable, except as follows: 1.1 Replacement: This standard applies to strapping tools.

This National Standard of Canada is joint with UL 745-2-35 and IEC 745-1. 1. Scope This clause of Part 1 is applicable, except as follows: 1.1 Replacement: This standard applies to drain cleaners.

This National Standard of Canada is joint with UL 745-3 and is based on IEC 745-1. 1. Scope 1.1 This standard applies to portable battery operated tools rated 30 volts or less intended for indoor or outdoor use, in non-hazardous locations, in accordance with the Canadian Electric Code, Part 1 and the National Electrical Code (NFPA70). This Part 3 is to be used in conjunction with the…

This National Standard of Canada is joint with UL 745-4-1, and based on IEC 745-2-1. 1. Scope This clause of Part 3 is applicable, except as follows; 1.1 Modification: The term "tools" is replaced with "drills and impact drills."

This National Standard of Canada is joint with UL 745-4-2, and based on IEC 745-2-2. 1. Scope This clause of Part 3 is applicable, except as follows: 1.1 Replacement: The term "tools" is replaced with "screwdrivers and impact wrenches."

This National Standard of Canada is joint with UL 745-4-3, and is based on IEC 745-2-3. 1. Scope This clause of Part 3 is applicable, except as follows: 1.1 Replacement: The term "tool" is replaced with "grinders, polishers, and disk-type sanders."

This National Standard of Canada is joint with UL 745-4-4, and is based on IEC 745-2-4. 1. Scope This clause of Part 3 is applicable, except as follows: 1.1 First sentence Replacement: The term "tool" is replaced with "sanders." Disc-type sanders are covered by Part 4-3.

This National Standard of Canada is joint with UL 745-4-5, and based on IEC 745-2-5. 1. Scope This clause of Part 3 is applicable, except as follows: 1.1 First sentence Replacement: The term "tool" is replaced with "circular saws and circular knives."

This National Standard of canada is joint with UL 745-4-6, and is based on IEC 745-2-6. 1. Scope This clause of Part 3 is applicable, except as follows: 1.1 Replacement: The term "tools" is replaced by "hammers."