Rechercher

1.1 SCOPE 1.1.1 This standard applies to newly produced vented gas-fired space heating appliances (see Part XIV, Definitions), hereinafter referred to as appliance(s), constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with manufactured gas; c. For use with mixed gas; d…

1. Scope 1.1 Classifications and Test Requirements Classification levels and test requirements provided within CSA Standard A440 and this Special Publication allow a purchaser or specifier to select windows suitable to their specific climatic conditions, height of installation, type of building, etc. The authority having jurisdiction assigns the minimum levels to be met. All other…

1. Scope 1.1 This Standard applies to (a) all windows covered by CSA Standard A440, including (i) vertical sliding windows; (ii) horizontal sliding windows; (iii) tilt-and-turn windows; (iv) casement windows, both fixed and operable; (v) projecting (awning/hopper) windows, and (vi) fixed windows, including fixed-window…

This National Standard of Canada is equivalent to International Technical Report CEI/IEC 1258:1994. 1 Scope This document outlines a generic process for developing materials for education and training of operators of medical electrical equipment. It may be used by standards organizations, manufacturers, regulatory agencies, hospital managers, clinical engineers, physician and nurse…

This National Standard of Canada is equivalent to International Standard IEc 871-2:1987. 1. Scope This report applies to capacitors according to IEC Publication 871-1 and gives the requirements for endurance testing of these capacitors.

This National Standard of Canada is equivalent to International Standard IEC 601-2-26:1994. 1.1 Scope This Standard specifies the particular safety requirements for ELECTROENCEPHALOGRAPHS (EEG) as defined in 2.102 hereinafter and also referred to as EQUIPMENT. The special requirements for other equipment also used in electroencephalography are not covered by this Standard, for…

This National Standard of Canada is equivalent to International Standard ISO 11135:1994. 1 Scope 1.1 This International Standard establishes requirements and guidance for validation and routine control of ethylene oxide sterilization processes for medical devices. Particular attention is drawn to the need for specific testing for safety, quality and efficacy, possibly exceeding the…

This National Standard of Canada is equivalent to International Standard ISO 11137:1995. 1 Scope This International Standard specifies requirements for validation, process control and routine monitoring in the radiation sterilization of health care products. It applies to continuous and batch type gamma irradiators using the radionuclides 60 Co and 137 Cs, and to irradiators using a…

This National Standard of Canada is equivalent to International Standard ISO/IEC 10918-2:1995. 1 Scope This Recommendation | International Standard is concerned with compliance tests for the continuous-tone still image encoding processes, decoding processes, and compressed data formats specified in ITU-T Rec. T.81 | ISO/IEC 10918-1. This Specification: - specifies compliance…

This National Standard of Canada is equivalent to International Standard CEI/IEC 601-1-3:1994. 1.201 Scope This Collateral Standard applies to medical diagnostic X-RAY EQUIPMENT and to sub-assemblies of such EQUIPMENT. 1.202 Object The object of this Collateral Standard is to establish general requirements for protection against IONIZING RADIATION in medical diagnostic X-RAY…