Rechercher

This National Standard of Canada is based on International Standard CEI/IEC 926:1995 1. Scope This standard specifies general and safety requirements for starting devices (starters and ignitors) for tubular fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting pulses not greater than 100 kV and which are used in combination…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-042: 1997. 1 Scope and object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This standard applies to AUTOCLAVES and STERILIZERS, including those with an automatic loading and unloading system, which incorporate a CHAMBER using toxic gas intended for the treatment of…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-043: 1997. 1. Scope and Object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This standard applies to STERILIZERS, including those having an automatic loading and unloading system, with one or more C HAMBERS operating at approximately atmospheric pressure and using…

1.1 SCOPE 1.1.1 This standard applies to newly produced vented gas fireplace heaters (See Part IV, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with propane; c. Direct vent appliances for manufactured (mobile) home OEm…

This National Standard of Canada is based on International Standard CEI/IEC 598-2-3: 1993 (second edition, 1993-04), including Amendment 1:1997, and 2:2000. Note - Amendment No. 2 reaffirmed 2007-03-28. Scope This Standard specifies requirements for luminaires for road and street lighting for use with tungsten filament, tubular fluorescent, and other discharge lamps designed to be…

This National Standard of Canada is based on International Standard IEC 60598-2-4:1997 Scope This section of Part 2 of IEC Publication 60598 specifies requirements for portable general purpose luminaires, other than handlamps, for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 120 V. It is to be read in conjunction with those sections…

This National Standard of Canada is based on International Standard IEC 432-2:1994. 1.1 Scope This part of IEC 432 specifies the safety and the related interchangeability requirements of tungsten halogen lamps for general lighting service. It covers those tungsten halogen lamps that are used as direct replacements for conventional tungsten filament lamps as well as new tungsten halogen…

This National Standard of Canada is based on International Standard CEI/IEC 920:1990 1. Scope This standard covers ballasts, excluding resistance types, for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, associated with tubular fluorescent lamps with or without pre-heated cathodes operated with or without a starter or starting device and having rated wattages, dimensions and…

Preface This is the first edition of CSA Special Publication PLUS 9014, ISO 9000 Interpretations. It is a compendium of interpretations given on the ISO 9000 family of Standards and approved by the CSA Technical Committee on Quality Management (TC on QM). The ISO 9000 family of Standards was developed by quality experts from around the world, under the auspices of the Internationa l…

This National Standard of Canada is equivalent to International Standard ISO 9000-2:1997. 1 Scope This part of ISO 9000 gives guidance on the application of the 1994 versions of ISO 9001, ISO 9002 and ISO 9003. It does not add to, or otherwise change, the requirements of ISO 9001, ISO 9002 or ISO 9003. In the case of conflicting interpretations of ISO 9001, ISO 9002 or ISO 9003 on…