Woodworking machines — Safety — Part 1: Common requirements
1 Scope
This document gives the safety requirements and measures to reduce risks related to woodworking machines arising during operation, adjustment, maintenance, transport, assembly, dismantling, disabling and scrapping and which are common to machines used in the woodworking industry. It is applicable to woodworking, stationary and displaceable machines when they are used as intended and…
1 Scope
1.1 General
This Standard provides criteria in accordance with the National Building Code of Canada, for the
structural design and evaluation of structures or structural elements made from wood or wood
products, including:
a) graded lumber;
b) glued-laminated timber;
c) cross-laminated timber (CLT);
d) unsanded plywood;
e) oriented strand board (OSB);
f) composite building…
1 Scope
1.1 These requirements cover bare and covered ferrules intended for field wiring and factory wiring for
use in accordance with the National Electrical Code, ANSI/NFPA-70 and Canadian Electrical Code, Part I,
CSA C22.1.
1.2 These ferrules are intended to facilitate the connection of stranded wire on to devices, such as
terminal blocks. Their purpose is to treat stripped wire and…
Standard for Fixed Condensed Aerosol Extinguishing System Units
1 Scope
1.1 These requirements cover the construction and operation of fixed condensed aerosol extinguishing
system units inclusive of aerosol generating extinguishing system units and aerosol generating automatic
extinguisher units intended for total flooding applications when installed, inspected, tested, and maintained
in accordance with the Standard for Fixed Aerosol Fire Extinguishing…
1 Scope
1.1
This Standard applies to individual gas appliance pressure regulators, which are not a part of a combination control (see Clause 3, Definitions), constructed entirely of new, unused parts and materials, hereinafter referred to as regulators, intended for application on individual gas appliances.
This Standard also applies to negative gas appliance pressure regulators (see Clause 3…
STANDARD FOR SAFETY Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking ...
1.1 These requirements cover the performance during fire tests of pre-engineered fire extinguishing
system units intended for the protection of commercial cooking equipment for restaurants, cafeterias and
other similar venues. For installation requirements, see the following documents: NFPA 17, Standard for
Dry Chemical Extinguishing Systems; NFPA 96, Standard for Ventilation Control and Fire…
Automatic electrical controls — Part 2-12: Particular requirements for electrically operated door lo...
1 Scope and normative references
1.1 Scope
[Add the following paragraph]
This Standard applies to the safety of such equipment designed and constructed for installation and use
in accordance with CSA C22.1, Canadian Electrical Code, Part I.
1.2 Normative references
[Add the following to the Part 1]
Any reference to International Standards that are adopted as National Standards of Canada…
1 Scope
1.1
This Standard applies to newly produced automatic valves (see Clause 3, Definitions) constructed entirely of new, unused parts and materials. These valves may be individual automatic valves or valves utilized as parts of automatic gas ignition systems.
This Standard also applies to commercial/industrial safety shutoff valves (see Clause 3), herein after referred to as C/I valves.…
Site preparation, foundation, and installation of buildings
1 Scope
1.1 Application
This Standard applies to single- and multi-section buildings supported on longitudinal floor beams, or perimeter rim joists designed to perform as beams.
1.2 Issues addressed
This Standard specifies requirements for the following aspects of building installation:
a)
site preparation;
b)
permanent foundations;
c)
anchorage to resist overturning and pier toppling…