Rechercher

This National Standard of Canada is based on International Standard IEC 570:1995. 1 Scope This standard applies to track systems with two or more poles for the connection of luminaires to the electrical supply, either of rated voltage not exceeding 440 V between poles with provision for earthing (class I) and a rated current not exceeding 16 A per conductor, or of a rated SELV not…

1 Scope 1.1 This Standard specifies the requirements for low-halogen aboveground (Type AG) reinforced thermosetting resin conduit (RTRC) and fittings for installation and use in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I, NFPA 70, National Electrical Code (NEC) and NOM-001-SEDE, Standard for Electrical Installations (Mexico), in non-hazardous locations. 1.2 The…

This National Standard of Canada is based on International Standard IEC 60745-1:2003, and is joint with UL 60745-1. 1 Scope 1.1 This International Standard deals with the safety of hand-held motor-operated or magnetically driven electric tools, the rated voltage of the tools being not more than 250 V for single-phase a.c. or d.c. tools, and 440 V for three-phase a.c. tools. So far as is…

Defines Canadian content and then gives explanations and examples of the terms in the definition. 'Canadian content', frequently an important aspect of the procurement process, is here defined so that it can be considered from a common understanding.

This National Standard of Canada is equivalent to International Standard IEC 60601-2-41:2009. 201.1.1 *Scope Replacement: This particular standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of SURGICAL LUMINAIRES AND LUMINAIRES FOR DIAGNOSIS, hereafter referred to as ME EQUIPMENT. This particular standard does not apply to – headlights; – endoscopes, laparoscopes and…

This National Standard of Canada is equivalent to International Standard ISO/IEC 10373-5:2006. 1 Scope ISO/IEC 10373 defines test methods for characteristics of identification cards as defined in ISO/IEC 7810. Each test method is cross-referenced to one or more base standards, which may be ISO/IEC 7810 or one or more of the supplementary standards that define the information storage…

This National Standard of Canada is equivalent to International Standard ISO/IEC 1539-1:2004. 1.1 Scope ISO/IEC 1539 is a multipart International Standard; the parts are published separately. This publication, ISO/IEC 1539-1, which is the first part, specifies the form and establishes the interpretation of programs expressed in the base Fortran language. The purpose of this part of…

This National Standard of Canada is equivalent to International Standard ISO/IEC 18092:2004. 1 Scope This International Standard defines communication modes for Near Field Communication Interface and Protocol (NFCIP-1) using inductive coupled devices operating at the centre frequency of 13,56 MHz for interconnection of computer peripherals. It also defines both the Active and the Passive…

This National Standard of Canada is equivalent to International Standard ISO/IEC 11693:2000 (second edition, 2000-04-15). 1 Scope This International Standard provides information necessary to store data on cards, to read data from cards, and for the physical, optical, and data interchangeability of optical memory cards in information processing systems. It defines the general characteristics…

This National Standard of Canada is equivalent to International Standard ISO/IEC 13842:1995. 1 Scope This International Standard specifies - the conditions for conformance testing and the Reference Drive; - the environments in which the cartridges are to be operated and stored; - the mechanical, physical and dimensional characteristics of the cartridge, so as to provide…