Rechercher

1 SCOPE 1.1 This Standard sets forth minimum design and construction requirements for fibre reinforced plastic, non-pressure tanks that are used for the underground storage of flammable and combustible liquids, such as: A Petroleum products, including petroleum hydrocarbon fuels with low bio-blends, per specifications, and similar flammable or combustible liquid petroleum derivatives, such…

This National Standard of Canada is equivalent to International Standard ISO/TS 15883-5:2005. 1 Scope This Technical Specification includes the test soils and methods that can be used to demonstrate the cleaning efficacy of washer-disinfectors (WD) according to the ISO 15883 series of standards. The inclusion of the test soils and methods in this Technical Specification does not indicate…

This CSA Standard is Joint with UL 1598. 1 Scope 1.1 This Standard applies to luminaires for use in non-hazardous locations and that are intended for installation on branch circuits of 600 V nominal or less between conductors in accordance with the Canadian Electrical Code, Part I (CEC), CSA C22.1, with the U.S. National Electrical Code (NEC), ANSI/NFPA 70, and with the Mexican National…

Scope 1.1 These requirements apply to organic lighting emitting diode (OLED) panels intended for task, ambient, or aesthetic illumination, and for portable or permanent installation in accordance with the following standards, and for connection to isolated (non-utility connected) power sources such as generators, batteries, fuel cells, solar cells, and the like, in accordance with the: a) In…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-54:2009. 201.1.1 Scope Replacement: This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ME EQUIPMENT and ME SYSTEMS intended to be used for projection RADIOGRAPHY and RADIOSCOPY. IEC 60601-2-43 applies to ME EQUIPMENT and ME SYSTEMS intended to be used for…

This National Standard of Canada is based on International Standard IEC 60601-1:2005. 1.1 * Scope This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of MEDICAL ELECTRICAL EQUIPMENT and MEDICAL ELECTRICAL SYSTEMS, hereafter referred to as ME EQUIPMENT and ME SYSTEMS. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME…

This National Standard of Canada is equivalen to International Standard ISO/IEC 10021-7:2003. 1 Scope This Recommendation | International Standard defines Interpersonal Messaging, a form of Message Handling tailored for ordinary interpersonal business or private correspondence. This Recommendation | International Standard is one of a series on Message Handling. ITU-T Rec. X.402 | ISO/IEC 10021…

This National Standard of Canada is equivalent to International Standard ISO/IEC 13660:2001 (first edition, 2001-09-01). 1 Scope This International Standard specifies device-independent image quality attributes, measurement methods, and analytical procedures to describe the quality of output images from hardcopy devices. This International Standard is applicable to human-readable documents…

This National Standard of Canada is equivalent to International Standard ISO/IEC 10021-7:1997. 1 Scope This Recommendation | International Standard defines Interpersonal Messaging, a form of Message Handling tailored for ordi nary interpersonal business or private correspondence. This Recommendation | International Standard is one of a series on Message Handling. KU-T Rec. X.402 | ISO/IEC…

This National Standard of Canada is equivalent to International Standard ISO/IEC 9595:1991. 1 Scope This International Standard defines an Application Service Element (the Common Management Information Service Element), which may be used by an application process in a centralized or decentralized management environment to exchange information and commands for the purpose of systems…