Rechercher

This National Standard of Canada is equivalent to International Standard ISO 13485:2003 (second edition, 2003-07-15). 1.1 General This International Standard specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer requirements and regulatory requirements…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-39:1999 (first edition, 1999-06). 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard specifies the minimum safety requirements for PERITONEAL DIALYSIS EQUIPMENT as defined in 2.1.102, hereinafter referred to as EQUIPMENT. It applies…

This National Standard of Canada is equivalent to International Standard CEI/IEC 79-14:1996. 1 Scope This part of IEC 79 contains the specific requirements for the design, selection and erection of electrical installations in explosive gas atmospheres. These requirements are in addition to the requirements for installations in non-hazardous areas. This standard applies to all…

This National Standard of Canada is equivalent to International Standard CEI/IEC 1215:1993 (first edition, 1993-04) 1 Scope and object This International Standard lays down requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open-air climates, as defined in IEC 721-2-1. It applies only to crystalline…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-46:1998, (first edition, 1998-06). 1.1 Scope Addition: This Particular Standard specifies safety requirements for OPERATING TABLES, as defined in 2.12.101, whether or not having electrical parts, including TRANSPORTERS, as defined in 2.12.104, used for the transportation of the table top to or from the base or…

This National Standard of Canada is equivalent to International Standard ISo 7065/2:1985. This standard specifies the magnetic characteristics, the track layout, and a track format to be used on a 200 mm (8 in) flexible disk cartridge, recorded at 13 262 ftprad on both sides using modified frequency modulation recording at a track density of 1,9 tracks per millimetre (tpmm) [48 tracks per…

This National Standard of Canada is equivalent to International standard ISo 6596/2:1985. This standard specifies the magnetic characteristics, the track layout, and a track format to be used on a 130 mm (5.25 in) flexible disk cartridge, recorded at 7 958 ftprad on one side using two-frequency recording at a track density of 1,9 tracks per millimetre (tpmm) [48 tracks per inch (tpi)],…

This National Standard of Canada is equivalent to International Standard ISO 5007:1989. This Standard specifies a method for measuring and evaluating the effectiveness of the seat in reducing the vertical whole-body vibration transmitted to the operator of an agricultural tractor. Vibration which reaches the operator other than through his seat, for example that sensed by his feet on…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60335-2-51: 1997 (second edition, 1997-02). 1 Scope This clause of part 1 is replaced by: This standard deals with the safety of stationary electric circulation pumps intended for use in heating systems or in service water systems, having a rated power input not exceeding300 W, their rated voltage is not…

This National Standard of Canada is equivalent to International Standard CEI/IEC 335-2-25: 1996 (fourth edition, 1996-07), including amendment 1:1999. 1 Scope This clause of part 1 is replaced by: This standard deals with the safety of microwave ovens for household use, their rated voltage being not more than 250 V. So far as is practicable, this standard deals with the common…