Rechercher

This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-2-8:2002. 1 Scope This technical report describes the electromagnetic disturbance phenomena of voltage dips and short interruptions in terms of their sources, effects, remedial measures, methods of measurement, and measurement results (in so far as these are available). They are discussed primarily as…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-2-26:2003. 1 Scope and object *1.1 Scope Addition: This Particular Standard specifies the particular safety requirements for ELECTRO-ENCEPHALOGRAPHS as defined in 2.2.103 and also referred to as EQUIPMENT. The special requirements for other equipment also used in electroencephalography are not covered by…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-33:2002. 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard applies to MAGNETIC RESONANCE EQUIPMENT as defined in 2.2.101 and MAGNETIC RESONANCE SYSTEMS as defined in 2.2.102. This Standard does not cover the application of…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-49:2001. 1 Scope and object *1.1 Scope This Particular Standard applies to the safety requirements of MULTIFUNCTION PATIENT MONITORING EQUIPMENT as defined in subclause 2.2.101. The scope of this standard is restricted to EQUIPMENT having either more than one APPLIED PART or more than one SINGLE FUNCTION,…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-51:2003. 1 Scope and object This clause of the General Standard applies except as follows: *1.1 Scope Addition: This Particular Standard specifies requirements for the safety, including essential performance, of RECORDING AND ANALYSING SINGLE CHANNEL AND MULTICHANNEL ELECTROCARDIOGRAPHS as defined in…

Cette norme du CSA et commune avec UL 1778. 1.1 Domaine d'application Remplacer cet article du DR par le texte qui suit: 1.1.1 Appareillage visé par cette norme Cette norme s'applique aux ALIMENTATIONS SANS COUPURE. La fonction essentielle d'une alimentation sans coupure, dans le contexte de cette norme, est d'assurer la continuité d'une alimentation électrique…

This National Standard of Canada is equivalent to International Standard IEC 61965:2003. 1 Scope This International Standard is applicable to cathode ray tubes and cathode ray tube assemblies (hereinafter referred to as CRTs) which are intended for use as components in apparatus and which have integral protection with respect to the effects of implosion. These requirements apply to CRTs…

Scope 1.1.1 This standard applies to newly produced, direct gas-fired industrial air heaters of the nonrecirculating type, hereinafter referred to as heaters, whose purpose is to offset building heat loss. All air to the heater shall be ducted directly from outdoors and the products of combustion generated by the heater are released into the air stream being heated. Heaters covered by this…

This National Standard of Canada is based on International Standard IEC 60745-2-1:2003, and is joint with UL 60745-2-1. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to drills and impact drills.

This National Standard of Canada is based on International Standard IEC 60745-2-2:2003, and is joint with UL 60745-2-2. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to screwdrivers and impact wrenches's.