Rechercher

1.1 This Standard specifies requirements for the wet storage of irradiated fuel and other radioactive materials requiring shielding or decay heat dissipation. 1.2 This Standard addresses the a) design; b) construction and commissioning; c) operation; and d) management of the wet storage system: Notes: 1) Design includes site selection. 2) Decommissioning is addressed in CSA N294. 1.3…

1.1 This Standard establishes criteria for the emergency management programs of on- and off-site organizations to address nuclear emergencies at Canadian reactor facilities. Notes: 1) This Standard may provide guidance for nuclear facilities other than reactor facilities. The operators of these facilities may, together with the AHJs, determine the applicability and suitability of the guidance…

1.1 This Standard provides requirements and guidance regarding beyond design basis accidents (BDBAs) at existing and new water-cooled reactor facilities with the fundamental objective of protecting the public and environment from the harmful effects of ionizing radiation. This includes a) determination of the functional DEC requirements for the structures, systems, and components (SSCs) that…

1.1 General This Standard specifies requirements for the physical inspection of dwellings, including a) the systems and components in and around a home that are to be inspected as part of a home inspection; b) the minimum extent to which a home is required to be inspected; c) general methods to be used for i) the examination and assessment of building components and systems at the time of the…

1.1 This Standard specifies requirements related to the performance, design, testing, labelling, and provision of instructions for manufactured single-span horizontal lifeline systems (HLL systems) (see Figure 1). These HLL systems are a component of a complete system for fall arrest. 1.2 This Standard does not apply to a) HLL systems i) with span lengths greater than 18.3 m (60 ft); ii)…

1.1 This Standard covers commercial, freestanding, under-counter, and counter-insert dishwashers, utensil-washers, and glass washers using water as the principal cleaning medium, hereafter referred to as dishwashers. These dishwashers utilize steam, gas, or electric heaters for heating the water. Heated water is provided to a dishwasher by means of steam, gas, or electric heating systems…

L'ISO 21809-3:2016 spécifie les exigences relatives au revêtement des joints soudés sur site des tubes en acier sans soudure et soudés destinés aux tronçons enterrés ou immergés des systèmes de transport par conduites utilisés dans les industries du pétrole, de la pétrochimique et du gaz naturel, tels que définis dans l'ISO 13623. La présente partie de L'ISO 21809-3:2016 spécifie…

IEC 60601-1:2005+A1:2012, 1.1 is replaced by: ISO 11197:2016 applies to the basic safety and essential performance of medical supply units, hereafter also referred to as me equipment. ISO 11197:2016 applies to medical supply units manufactured within a factory or assembled on site, including cabinetry and other enclosures, which incorporate patient care services. NOTE 1 A party that…

Le paragraphe 1.1 de l'IEC 60601‑1:2005+A1:2012 est remplacé par: ISO 11197:2016 s'applique à la sécurité de base et aux performances essentielles des gaines techniques à usage médical, également désignées sous le terme d'appareils em (appareils électromédicaux). ISO 11197:2016 s'applique aux gaines techniques à usage médical fabriquées en usine ou montées sur site, y compris…

ISO 80369-6:2016 specifies requirements for small-bore connectors intended to be used for connections in neuraxial applications. Neuraxial applications involve the use of medical devices intended to administer medications to neuraxial sites, wound infiltration anaesthesia delivery, and other regional anaesthesia procedures or to monitor or remove cerebro-spinal fluid for therapeutic or diagnostic…