Atmosphères explosives - Partie 10-2: Classement des emplacements - Atmosphères explosives poussiére...
IEC 60079-10-2:2015 traite de l'identification et du classement des emplacements où des atmosphères explosives poussiéreuses et des couches de poussières combustibles sont présentes, afin de permettre une évaluation appropriée des sources d'inflammation à utiliser dans de tels emplacements. Dans la présente norme, les atmosphères explosives poussiéreuses et les couches de poussières…
Electric vehicle wireless power transfer (WPT) systems — Part 1: General requirements
This part of IEC 61980 applies to the equipment for the wireless transfer of electric power
from the supply network to electric road vehicles for purposes of supplying electric energy to
the RESS (Rechargeable energy storage system) and/or other on-board electrical systems in
an operational state when connected to the supply network, at standard supply voltages
ratings per IEC 60038 up to 1…
Solid biofuels — Determination of moisture content — Oven dry method — Part 2: Total moisture — Simp...
This part of ISO 18134 describes the method of determining the total moisture content of a test sample
of solid biofuels by drying in an oven and may be used when the highest precision is not needed, e.g. for
routine production control on site. The method described in this International Standard is applicable to
all solid biofuels. The moisture content of solid biofuels (as received) is always…
Planification, conception et maintenance de systèmes de drainage dans les communautés du Nord
1.1 Domaine
Cette norme précise les prescriptions pour la planification, la conception et la maintenance de systèmes
de drainage dans les limites des communautés nordiques; elle ne couvre pas le drainage hors des
limites des communautés.
Note : Des ressources et une expertise particulières sont nécessaires pour réaliser un drainage hors des limites des
communautés, et celles-ci pourraient…
1.1 General
This Standard specifies requirements for workplace electrical safety necessary for the practical safeguarding
of workers during activities such as the installation, inspection, operation, maintenance, and demolition of
electric conductors and electric equipment, as well as work in proximity of energized electrical equipment.
1.2 Application
While it can be applied by…
STANDARD FOR THERMAL INSULATION - SPRAY APPLIED RIGID POLYURETHANE FOAM, MEDIUM DENSITY - MATERIAL S...
1 SCOPE
1.1 This Standard provides the physical property requirements and test methods to determine the
material properties for medium density closed cell spray-applied rigid polyurethane foam, used for thermal
insulation or for other purposes in building and non-building applications in both site-built construction and
prefabrication (manufacturing) facilities.
1.2 The spray polyurethane…
Community drainage system planning, design, and maintenance in northern communities
1 Scope and application
1.1 Scope
This Standard specifies provisions for the planning, design, and maintenance of surface drainage systems within northern community boundaries. Provisions for drainage outside the community boundary are not covered by this Standard.
Note: Specific resources and expertise are required to address drainage provisions outside the community boundary. These resources…
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio d...
CISPR 16-1-5:2014 specifies the requirements for calibration sites in the frequency range 5 MHz to 18 GHz used to perform antenna calibrations according to CISPR 16-1-6. It also specifies the requirements for reference test sites that are used for the validation of compliance test sites in the frequency range 30 MHz to 1 000 MHz according to CISPR 16-1-4. It has the status of a basic EMC standard…
Moderating the effects of permafrost degradation on existing building foundations
1 Scope
1.1 Mitigation techniques and other actions
This Standard covers the following mitigation techniques to maintain permafrost or remediate
permafrost degradation around existing buildings or structures:
a) site techniques that consist of
i) shading;
ii) drainage and grading; and
iii) ground cover and snow management;
b) foundation techniques that consist of
i) ventilation;
ii)…
Modérer les effets de la dégradation du pergélisol des structures existantes
1 Domaine d'application
1.1 Techniques d'atténuation et autres mesures
Cette norme traite des techniques d'atténuation suivantes visant à maintenir le pergélisol ou à remédier
à sa dégradation autour des structures existantes :
a) techniques agissant sur le site :
i) protection solaire ;
ii) drainage et nivellement ; et
iii) gestion du recouvrement de sol et de la neige ;
b…
