Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport pr...
ISO 15765-2:2016 specifies a transport protocol and network layer services tailored to meet the requirements of CAN‑based vehicle network systems on controller area networks as specified in ISO 11898‑1. It has been defined in accordance with the diagnostic services established in ISO 14229‑1 and ISO 15031‑5 but is not limited to use with them and is also compatible with most other communication…
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnosti...
ISO 15031-3:2016 references the latest publication of SAE J1962.
On-board diagnostic (OBD) regulations require road vehicles to be equipped with a standardized connector for purposes of access to OBD information by ISO 15031‑4 compliant external test equipment. This part of ISO 15031 describes the requirements for the physical connection and associated pin usage to allow for standard access to…
Road vehicles — Test method for the quantification of on-centre handling — Part 2: Transition test
ISO 13674-2:2016 specifies a test schedule that addresses a particular aspect of the transition test, the on-centre handling characteristics of a vehicle. It is applicable to passenger cars in accordance with ISO 3833 and to light trucks, N1 category.
NOTE The manoeuvre specified in this test method is not representative of real driving conditions, but is useful for obtaining measures of…
Road vehicles — Pedestrian protection — Head impact test method
ISO 14513:2016 specifies a test method to simulate the head impact of an adult pedestrian to the bonnet top of passenger vehicles or light truck vehicles of up to 3,5 t (GVM), as defined in ISO 3833. The impact device to be used in this test method will be robust for a vehicle impact velocity of up to 11 m/s. The test method specified addresses the reduction of an adult pedestrian head injury…
Road vehicles — Circuit breakers — Part 5: Circuit breakers with bolt with rated voltage of 450 V
ISO 10924-5:2016 specifies circuit breakers with rated voltage of 450 V for use in road vehicles. It establishes, for this circuit breaker type, the rated current, test procedures, performance requirements and dimensions.
ISO 10924-5:2016 is intended to be used in conjunction with ISO 10924‑1 and with ISO 10924‑2. The numbering of its clauses corresponds to that of ISO 10924‑1 whose requirements…
Road vehicles — Circuit breakers — Part 1: Definitions and general test requirements
ISO 10924-1:2016 defines terms and specifies general test requirements for circuit breakers for use in road vehicles with a nominal voltage of 12 V d.c., 24 V d.c, 48 V d.c. and 450 V d.c.
ISO 10924-1:2016 is intended to be used in conjunction with other parts of ISO 10924. The numbering of its clauses corresponds to that of this part of ISO 10924 whose requirements are applicable, except where…
Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 4: Ethernet-based high...
ISO 13400-4:2016 specifies a minimum set of diagnostic Ethernet connector requirements which are based on ISO 15031‑3. The ISO 15031‑3 diagnostic connector is referenced by legislation in many countries.
The diagnostic connection specified in this part of ISO 13400 consists of two mating connectors: the vehicle connector and the external test equipment connector as specified in ISO 15031‑3.
ISO…
ISO 27145-4:2016 defines the requirements to successfully establish, maintain and terminate communication with a vehicle that implements the requirements of the WWH-OBD GTR (Global technical regulation No. 5; see Reference [16]). This requires plug and play communication capabilities for the vehicle, as well as for any test equipment that intends to establish communication with a vehicle. This…
