Gasoline engines with direct injection — Cleanliness assessment of fuel injection equipment
ISO 19724:2016 specifies cleanliness assessment procedures for evaluating the amount of debris present on the clean side of the constituent parts of high pressure gasoline direct fuel injection systems. The presence of such debris could lead to a reduction in the system's operational performance.
While other International Standards (e.g. ISO 16232 series) relate to the cleanliness of…
Road vehicles — Fuse-links — Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (...
ISO 8820-4:2016 specifies fuse-links with female contacts (type A) and bolt-in contacts (type B) for use in road vehicles. It establishes, for these fuse-link types, the rated current, test procedures, performance requirements and dimensions.
It is applicable to fuse-links with a rated voltage of 32 V or 58 V, a current rating ≤140 A and a breaking capacity of 1 000 A intended for road vehicles.…
Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: Wired vehicle inter...
ISO 13400-3:2016 specifies the vehicle communication interface and test equipment requirements for a physical and data link layer based on IEEE 802.3 100BASE-TX.
This interface serves as the physical basis for IP-based communication between the vehicle and test equipment. This document specifies the following aspects:
- requirements for signal and wiring schematics in order to ensure…
Road vehicles — Tests for rigid plastic safety glazing materials
ISO 15082:2016 specifies commonly used test methods relating to the safety requirements for rigid plastic safety glazing materials in a road vehicle, regardless of the type of plastic of which they are composed.
Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements
ISO 15501-1:2016 specifies the minimum safety requirements applicable for the functionality of CNG on-board fuel systems intended for use on the types of motor vehicles defined in ISO 3833. This document is applicable to vehicles using compressed natural gas in accordance with ISO 15403, including mono-fuel, bi-fuel or dual-fuel applications, original-production and converted vehicles.
All…
Heavy commercial vehicles and buses — Test method for yaw stability — Sine with dwell test
ISO 18375:2016 describes an open-loop test method for determining the yaw stability of a vehicle on a low friction road surface. It applies to heavy vehicles, that is commercial vehicles, commercial vehicle combinations, buses and articulated buses as defined in ISO 3833 (trucks and trailers with maximum weight above 3,5 tonnes and buses and articulated buses with maximum weight above 5 tonnes,…
Road vehicles — Compressed natural gas (CNG) fuel systems — Part 2: Test methods
ISO 15501-2:2016 specifies the test methods for checking the minimum safety requirements specified in ISO 15501‑1. It is applicable to the functionality of the fuel systems designed to operate on compressed natural gas of motor vehicles as defined in ISO 3833.
Impact test procedures for road vehicles — Rear seat positioning procedures for Hybrid III 5th perce...
ISO/TR 17950:2016 specifies the conditions for the recommended placement of the Hybrid III 5th percentile female frontal impact dummy (HIII5F) when used in forward-facing outboard 2nd row rear seating positions of passenger cars (M Category) for frontal impact testing . For example:
- Frontal Impact 0° and Pole (ISO 3560)
- Frontal Impact Offset Deformable Barrier (ISO 15828)
Mechanical vibration — Road surface profiles — Reporting of measured data
ISO 8608:2016 specifies a uniform method of reporting measured vertical road profile data for either one-track or multiple-track measurements.
It applies to the reporting of measured vertical profile data taken on roads, streets and highways, and on off-road terrain. It does not apply to rail-track data. Measurement and processing equipment and methods are not included.
