L'IEC 63076:2019+AMD1:2023 s'applique aux systèmes électriques à bord des véhicules de type trolleybus, tels que définis en 3.1, alimentés par une tension d'alimentation nominale (Un) comprise entre 600 V en courant continu et 750 V en courant continu. Le présent document définit les exigences et les recommandations de construction, notamment pour éviter les dangers de type…
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnosti...
This document references the latest publication of SAE J1962.
On-board diagnostic (OBD) regulations require road vehicles to be equipped with a standardized connector for purposes of access to OBD information by external test equipment. This document describes the requirements for the physical connection and associated pin usage to allow for standard access to the OBD data.
This document is…
Graphical symbols — Registered public information symbols
This document specifies graphical symbols for the purposes of public information.
This document is generally applicable to public information symbols in all locations and all sectors where the public has access. However, it is not applicable to safety signs or those sectors subject to specific regulations (e.g. traffic signs on public roads).
This document specifies the original symbols that can…
Machines à bois — Sécurité — Partie 11 : Machines combinées
1 Domaine d'application
Le présent document donne les exigences et les mesures de sécurité pour les machines à bois combinées, fixes et transportables, comportant au moins deux unités de travail pouvant être utilisées séparément et à chargement et déchargement manuels de la pièce, ci-après désignées «machines». Les unités de travail intégrées peuvent être de ces types uniquement:
— une…
Appareils électrodomestiques et analogues — Sécurité — Partie 2-40 : Exigences particulières pour le...
Domaine d’application
La présente annexe et ses exigences ne s’appliquent qu’aux appareils à fluide frigorigène et à leurs
pièces et ensembles, conçus spécifiquement pour le refroidissement du MATÉRIEL INFORMATIQUE et
des ZONES DE MATÉRIEL INFORMATIQUE.
En outre, les exigences de la présente annexe ne s’appliquent qu’aux appareils mentionnés ci-dessus,
a) qui utilisent un fluide frigorigène…
Household and similar electrical appliances — Safety — Part 2-25: Particular requirements for microw...
1 Scope
This clause of Part 1 is replaced by the following.
This part of IEC 60335 deals with the safety of microwave ovens for household and similar
use, their rated voltage being not more than 250 V.
This standard also deals with combination microwave ovens, for which Annex AA is
applicable.
This standard also deals with microwave ovens intended to be used on board ships, for which
Annex…
Household and similar electrical appliances — Safety — Part 2-43: Particular requirements for clothe...
1 Scope
This clause of Part 1 is replaced by the following.
This part of IEC 60335 deals with the safety of electric clothes dryers for drying textiles on
racks located in a warm airflow, clothes dryers intended for drying footwear or gloves and to
electric towel rails, for household and similar purposes, their rated voltage being not more
than 250 V.
NOTE 101 The clothes racks can be fixed…
Household and similar electrical appliances — Safety — Part 2-51: Particular requirements for statio...
1 Scope
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electric stationary circulation pumps for
household and similar purposes intended for use in heating systems or in service water
systems, their rated voltage being not more than 250 V for single-phase appliances and
480 V for other appliances.
NOTE 101 The hydraulic and…
This standard specifies the requirements regarding materials, watertightness, structural resistance, noise, mechanical and electrical components and other physical characteristics of onsite domestic wastewater treatment systems as well as requirements on performance based on the minimal characteristics of the effluent treated with such systems. This standard also specifies the documentation to be…
Systèmes de traitement autonome des eaux usées domestiques
La présente norme comporte des exigences relatives aux matériaux, à l’étanchéité, à la résistance structurale, au bruit, aux composants mécaniques et électriques et à d’autres caractéristiques physiques des systèmes de traitement des eaux usées domestiques ainsi que des exigences de rendement basées notamment sur les caractéristiques minimales de l’effluent traité à l’aide de tels systèmes. La…