Textile Test Methods
Non-fibrous Materials on Textiles
1. PURPOSE AND SCOPE
1.1 This method is intended for the removal and quantitative determination
of certain types of non-fibrous materials that may be present on
textiles. Reference should also be made to CAN/CGSB-4.2 Nos. 40 and
42.
1.2 Owing to the wide variety of substances that may be added to textile
materials during manufacture, and to the…
1. SCOPE
1.1 This standard applies to 2/2 twill serge cloth made from 2-ply worsted
yarns.
1.2 The testing and evaluation of a product against this standard may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address all the safety aspects
associated with its use. Anyone using this standard has the…
1. SCOPE
1.1 This standard states the requirements for three-strand manila rope made
from abaca (Musa textilis) fibre untreated and rot-resistant.
1.2 The testing and evaluation of a product against this standard may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address all the safety…
1. SCOPe
1.1 This standard states the requirements for cotton twine for use in tying
machines, or for general use.
1.2 The testing and evaluation of a product against this standard may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address all the safety aspects
associated with its use.…
Reusable Polyethylene Drums With Non-Removable Head Without Overpack (TC-34)
1. SCOPe
1.1 This standard applies to reusable polyethylene drums used to transport
dangerous goods. It states their required capacity, materials,
construction, performance and marking.
1.2 The testing and evaluation of a product against this standard may
require the use of materials and/or equipment that could be hazardous.
This document does…
Information technology - Telecommunications and information exchange between
systems - High-level d...
The international community has decided to make this standard available only in
the English language version. It has been adopted as a National Standard of
Canada on this basis.
This National Standard of Canada is equivalent to International Standard
ISO/IEC 8885:1993.
1 Scope
The principal use of the XID frame is to exchange data link information between
two or more HDLC stations…
1. SCOPE
1.1 This standard applies to a mixture of ingredients compounded for use on
floors, prior to sweeping, to reduce dust.
1.2 Oil-based sweeping compounds produced to this standard are suitable for
use on wood, steel and other floorings that are not varnished, sealed,
painted or waxed, and that are not affected by the sand or mineral oil
in the…
1. Scope
1.1 This standard applies to extruded sections produced from a rigid
compound of poly(vinyl chloride) intended as siding, soffits and fascia
for the exterior cladding of buildings. The requirements for fasteners
and accessories used in conjunction with PVC exterior claddings are
also included in this standard.
1.2 For information on installation…
1. Scope
1.1 General
1.1.1
Except as provided for in Clause 1.1.2, this Standard applies to the design,
construction, installation, operation, and inspection of every refrigerating
system, as provided for by the Act and defined in this Code.
1.1.2
This Standard does not apply to the use of water or air as a refrigerant, nor
to bulk-storage gas tanks that are not permanently…
Performance Packagings for Transportation of Dangerous Goods
1. SCOPe
1.1 This standard contains requirements for packagings based on United
Nations Recommendations on the Transport of Dangerous Goods. It
specifies performance requirements of basic packaging types for
packagings intended for handling or transporting dangerous goods.
1.2 The testing and evaluation of a product against this standard may…
