1. SCOPe
1.1 This standard specifies the requirements for spring-type paper clips
` designed to hold various quantities of paper depending on the type and
size of clip.
1.2 The testing and evaluation of a product against this standard may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address…
Coating Systems for Marine Floating Navigational Aids (Buoys)
1. SCOPE
1.1 This standard applies to coating systems suitable for the painting of
marine floating navigational aids, (buoys), for the complete system
above the waterline and as a first coat and intermediate coat below the
waterline to provide a minimum of five year service in seacoast and
heavy industrial environment.
1.2 The coating systems are intended…
Methods of Sampling and Testing Waxes and Polishes
Sweeping Compound Formulation
1. SCOPe
1.1 This method is used to determine the percentage of oil, sawdust and
sand in sweeping compound.
1.2 The testing and evaluation of a product against this method may require
the use of materials and/or equipment that could be hazardous. This
document does not purport to address all the safety aspects associated
with its use. Anyone using this…
Textiles — Commercial laundering procedure for textile fabrics prior to flammability testing
Specifies methods for assessing the possible effect of repeated commercial laundering on the flammability of textile fabrics. The effect of laundering is simulated using an automatic horizontal drum washing machine or small-scale laundry drum (wash wheel).
Methods of Testing Petroleum and Associated Products
Visual Haze Rating of Distillate Fuel Oils
1. SCOPE
1.1 This method describes a field procedure for the rapid visual evaluation
of distillate fuel oil haziness.
1.2 The testing and evaluation of a product against this method may require
the use of materials and/or equipment that could be hazardous. This
document does not purport to address all the safety aspects associated
with its use.…
1. SCOPe
1.1 This standard specifies requirements for three types of double-braided
ropes consisting of braided core and braided cover, for general use.
1.2 Intended Uses
1.2.1 Type 1 - Type 1 rope is intended to be used where high strength, high
elongation and nonfloating properties are required. Suggested uses:
ocean towing, light-jackstay rig…
The Spillage Test
Method to Determine the Potential for Pressure-Induced Spillage from Vented,
Fue...
1. PURPOSE
1.1 The purpose of this standard is to provide a method for determining
whether air moving devices in a dwelling are likely to impair normal
venting of fuel-fired, vented appliances through depressurization at
the appliance which creates an uncacceptable risk to health, safety or
comfort.
1.2 This standard provides a table for…
Lifting Systems for Aircraft Boarding of Passengers with Mobility Impairments
1. SCOPe
1.1 This standard specifies the requirements for the design, construction,
performance and testing of self-propelled and manually transported or
towed lifting equipment used to assist in the boarding of aircraft
passengers with mobility impairments.
1.2 For more detailed information on intended uses, see par. 8.2.
1.3 The testing and evaluation…
Methods of Testing Petroleum and Associated Products
CGSB Cetane Index of Diesel Fuels
1. SCOPE
1.1 This method describes a means for calculating the cetane index of
diesel fuels (without cetane improvers) from the aniline point,
distillation, density and viscosity. The index, as computed from the
prescribed formula, is termed the CGSB Cetane Index (CI).
1.2 A suggested procedure is also outlined in Appendix A to estimate the…
Biological Containment Cabinets (Class I and II): Installation and Field Testing
1. Scope
1.1
This Standard applies to the installation and testing of Class I and Ii
biological containment cabinets. Such cabinets are designed to control and
contain particulates and aerosols generated by routine laboratory
manipulations.
This Standard provides criteria for testing and uniform procedures for
conducting the identified field tests. The tests are intended to provide…