1. Scope
1.1 This standard applies to an oil-based cementitious primer for use on
new or old galvanized metal surfaces under ordinary atmospheric
exposure conditions.
1.2 The testing and evaluation of a product against this standard may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address…
Methods of Sampling and Testing Waxes and Polishes
Sampling
1. Scope
1.1 This method describes a procedure used for sampling waxes and polishes
in paste or liquid form.
1.2 The importance of careful sampling of materials for analysis cannot be
overemphasized and the procedure described should be followed as
minimum requirements. Careful sampling should be co-ordinated with
careful handling and preparation…
Methods of Sampling and Testing Waxes and Polishes
Free Alkali
1. Scope
1.1 This method describes a procedure to determine the presence of free
alkali in a sample of wax or polish.
1.2 The testing and evaluation of a product against this method may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address all the safety aspects
associated with its use. Anyone…
Methods of Sampling and Testing Waxes and Polishes
Performance Characteristics
1. Scope
1.1 This method describes a procedure for evaluating the performance of a
wax or polish.
1.2 The testing and evaluation of a product against this method may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address all the safety aspects
associated with its use. Anyone using this method has…
Methods of Sampling and Testing Waxes and Polishes
Absorption
1. Scope
1.1 This method is used to determine the ability of an absorbent material
to absorb oil, water or a mixture of oil and water.
1.2 The testing and evaluation of a product against this method may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address all the safety aspects
associated with…
1. Scope
1.1 This standard specifies requirements for two types of sweeping compound
used on floors prior to sweeping to reduce dust.
1.2 Type 1 compound is suitable for floors in locations where oil is
undesirable, for example, garages, platforms, machine shops and
warehouses. It is not recommended for use on waxed wooden floors, or
on composition and…
1. Scope
1.1 This standard applies to a flat latex finish for all types of interior
walls and ceilings either new or previously painted.
1.2 Paint complying with this standard is intended for use on walls and
ceilings with the exception of bathrooms and kitchens. It is suitable
for application over practically any type of wall surface, including…
Methods of Testing Petroleum and Associated Products
Performance of Lubricating Grease in Antifrict...
1. Scope
1.1 This method covers the determination of the performance of greases in
size 310 antifriction bearings.
1.2 The testing and evaluation of a product against this method may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address all the safety aspects
associated with its use.…
Textile Test Methods
Resistance to Pilling, Rotating Box Method
1. PURPOSE AND SCOPE
1.1 This method describes a procedure for evaluating the resistance of
fabrics to pilling using the rotating box method. A pill is a bunch or
ball of entangled fibres attached to the surface of a fabric by one or
more fibres.
1.2 This method applies to most types of fabric (woven and knitted) but not
to those made of 100%…
Flat Hog-Bristle Brushes for Paint, Varnish, Enamel and Lacquer
1. Scope
1.1 This specification provides requirements for flat brushes with hog
bristles for the application of paint, varnish, enamel and lacquer. It
does not apply to special types of brushes such as sash tools (CGSb
specification 22.3) and stencilling brushes.
1.2 Brushes made with hog bristles are particularly suitable for use with
oil-based paints…
