Rechercher

This National Standard of Canada is equivalent to International Standard IEC 60601-1-2:2001 (second edition, 2001-09). 1 Scope and object 1.201 Scope This standard applies to ELECTROMAGNETIC COMPATIBILITY of MEDICAL ELECTRICAL EQUIPMENT and MEDICAL ELECTRICAL SYSTEMS, hereinafter referred to as EQUIPMENT and SYSTEMS, respectively. 1.202 Object This standard specifies requirements and tests for…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-17:04, second edition. 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: 1.1.101 This Particular Standard specifies requirements for the safety of automaticallycontrolled EQUIPMENT for BRACHYTHERAPY of patients using AFTERLOADING techniques. 1.1.102 This…

SCOPE This standard applies to backwater valves designed to be used in drainage systems (see note) and to check valves designed to be used in drainage systems that do not drain by gravity to the building sewer, in compliance with the requirements of the National Plumbing Code of Canada - 2005. NOTE - The National Plumbing Code of Canada - 2005 defines the term drainage system as follows: "…

This CSA Standard is joint with both UL 486D and NMX-J-519-ANCE-05. 1 Scope 1.1 The requirements in this standard cover sealed wire connector systems, including insulating caps, covers, resins, tubing, and tapes provided with, or for use with, specific wire connectors. These systems are intended for wet or damp locations, and other installations such as direct burial, below grade, or above…

1.1 Scope 1.1.1This standard applies to newly produced vented gas fireplace heaters (See Part IV, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials: a.For use with natural gas; b.For use with liquified petroleum (propane); c.Direct vent appliances for manufactured home (USA only) or mobile home OEM installation convertible…

This National Standard of Canada is joint with UL 60745-2-19. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to jointers for cutting into wood or similar material.

1 Scope 1.1 This Standard applies to the design, installation, operation, maintenance, and testing of emergency generators and associated equipment for providing an emergency power supply to electrical loads in buildings and facilities when the normal power supply fails and an emergency power supply is required by the National Building Code of Canada (NBC). Notes: (1) For guidelines on…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15415:2004. 1 Scope This part of ISO/IEC 15415 - specifies two methodologies for the measurement of specific attributes of two-dimensional bar code symbols, one of these being applicable to multi-row bar code symbologies and the other to twodimensional matrix symbologies; - defines methods for evaluating and…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15962:2004. 1 Scope The data protocol used to exchange information in an RFID system for item management is specified in ISO/IEC 15961 and in this International Standard. Both International Standards are required for a complete understanding of the data protocol in its entirety; but each focuses on one…

This National Standard of Canada is equivalent to International Standard ISO/IEC TR 18047-3:2004. 1 Scope This part of ISO/IEC TR 18047 defines test methods for determining the conformance of radio frequency identification devices (tags and interrogators) for item management with the specifications given in the corresponding part of ISO/IEC 18000, but does not apply to the testing of conformity…